Manitou Pro Cartridge 1.5kg forks, LX M570 cranks & more

Fatal Swan

Senior Retro Guru
Feedback
View
Prices are posted to UK, payment by PP gift or pay the fees.

A pair of Manitou Pro Cartridge forks. Bought on here a couple of weeks ago (for more than I'm asking!) but I managed to find a fork better suited to the frame I wanted them for. Superlight at just 1.55kg (weighed on my digital scales)! Some marks here and there and some damage to the stickers. The forks are working ok, stanchions and the elastomers inside are in good order, could be be a little smoother if given a proper regrease. No mounts for disc brakes and the V-brake bosses are missing. They are standard M8 size though. I do have the tabs which provide the hole for the brake spring to slot into, so I'll include these. The steerer tube is 18.5cm long (unthreaded) -it has not been tidily cut at the top though it is perfectly functional, could be recut or filed if it really bothers you. There's a star nut installed though when I fitted the fork I found that it was very slightly off centre. Again, perfectly functional but it you like you can just tap it out and replace it. £27 posted


A set of Shimano LX M570 cranks in silver (compact, 4-arm, Square taper. Bought new, fitted once but have never been ridden - immediately after I bought them found some Octalink cranks I preferred. The left side has some marks where the loose crank knocked against chainrings in transit. You won't find much lighter than this for square taper cranks unless you go high end. No rings or chainring bolts, just the cranks and M8 allen key bottom bracket bolts. £17 posted, pictures to follow shortly.

An anodised blue (turquoise) brake cable hanger for cantilever brakes. Probably Tektro. For 1" diameter headsets (22.2 stems). A few light marks only. £5 posted

A Crud Claw, complete, with what seems to be almost enough spares parts to make up a second one too. They seem to be 2 different generations/models and not all the parts are interchangeable. Two of the combs are 7-speed, one 8-speed. £5 posted


SOLD:

1 pair of Onza HO Cantis. One has the trademark crack in the pad holder - on the brake on the left hand side in the photo, look above the top left bolt. No other cracks that I can see, and it comes with the chill pill! £13 posted. SOLD

A pair of Rolf QR skewers in black. Came off a superlight pair of Rolf Dolomites. Nice design, I especially like the shape of the non-lever end. The rear has a couple more scratches than the front. £10 posted SOLD
 

Attachments

  • hanger.jpg
    hanger.jpg
    116.6 KB · Views: 1,143
  • Crud claws.jpg
    Crud claws.jpg
    180 KB · Views: 1,090
  • Manitou pro ii.jpg
    Manitou pro ii.jpg
    230.6 KB · Views: 1,008
  • Manitou pro.jpg
    Manitou pro.jpg
    242.1 KB · Views: 1,008
Il take the onza HO's mate have been thinking of making some in stainless for a while now and think i should small run they will be heavyish but they wont crack ;)

Pm me your payment details and il gift it over :D
 
Back
Top