M900 XTR - Cassette, Canties, R Mech BB And crank

[taffy]

XTR M900 stuff



12 -28 8 speed cassette. very good nick £35 posted

Mid Cage rear mech £55 posted

73 mm shell 113 Axle bb - silky smooth £22 posted

Front and rear canti set with bolts washers and springs - fitted with XT cartridge pad holders £55 or £65 with a NOS boxed set of pad inserts

lastly one drive side crank arm 175 long needs a polish tbh. don't ask me where the LH one is as I'd like to know myself £25

Prices posted in the UK

not after swaps
may well consider offers or a bulk buy discount

 

[ishaw]

Interested in the m900 arm as I've one but the logo has vanished. Will this polish up and retain the logo or is the finish crazed underneath the finish? Difficult to tell as the pic is a touch blurry.

Cheers

 

[taffy]

Pm'd it would need polishing to look its best tbh

 

[taffy]

Bump

 

[Petaypan]

Hi, can you tell me if the mech is 8 speed (M910?) as I need one.
Might be interested in the cantis too...

 

[taffy]

Its an 8 speed M900

M910 just changed the spring (diagonally across the parallelogram on the m910 vs the traditional coiled round one of the pivot pins on the M900)

both were 8 speed regardless.

 

[keithb]

Just to add, the M900 will also run on a 9 speed setup. I have one on my Zaskar and it runs 9 speed perfectly.

 

[Petaypan]

Its an 8 speed M900

M910 just changed the spring (diagonally across the parallelogram on the m910 vs the traditional coiled round one of the pivot pins on the M900)

both were 8 speed regardless.

PM sent.

 

[taffy]

and replied

 

[taffy]

Rear mech and canties sold pending payment