M737 M651 M650 & MKS

gmac123

MacRetro Rider
All prices post in UK, Photos below descriptions

1. Deore DX Hubs - FH-M650 Rear 32 - HB-M650 Front 32 - £22

Originally laced to ritchey vantage rim, which were ridden out. Been lying in a box for years. I've given them a wipe for photo purposes, however these will need strip, degreased and probably some fresh cones. The front skewer is missing the original nut side, both skewers have no springs.

2. Deore DX Front Mech FD-M651- Top Pull 28.6 Clamp - £12

Needs a clean, functions well.

3. Deore XT Front Mech FD-M737 Top Pull 31.8 Clamp - £18

Needs a clean, functions well. Some tarnish on the clamp.

4. Deore DX BR-M651 Cantilever - £7

5. MKS Pedals - £10


DX hubs1 by gmac123, on Flickr


DX hubs3 by gmac123, on Flickr


DX hubs4 by gmac123, on Flickr


M651 Top Pull by gmac123, on Flickr


M737 top pull by gmac123, on Flickr


M651 canti2 by gmac123, on Flickr


MKS pedal1 by gmac123, on Flickr


MKS pedal2 by gmac123, on Flickr
 
Interested in the Deore XT front mech M737.

Have just posted a query about 7 speed setups etc but can I assume this front mech should work happily with a 7 speed shimano rear derailleur?

Thanks
 
drawis":3gb3f478 said:
Interested in the Deore XT front mech M737.

Have just posted a query about 7 speed setups etc but can I assume this front mech should work happily with a 7 speed shimano rear derailleur?

Thanks

I run it seven speed fine on my kili. Full M737 but 7 speed not 8 without problems.
 
drawis":vo0sxw97 said:
Interested in the Deore XT front mech M737.

Have just posted a query about 7 speed setups etc but can I assume this front mech should work happily with a 7 speed shimano rear derailleur?

Thanks

I've used this in a seven speed set up in the 90's and it's since been in storage 10+ years
 
Back
Top