Low stack headset for '93 Kona Cinder Cone

[severnthheathen]

I'm re-building a '93 Cinder Cone. I need a threaded 1 1/8" headset with a stack height of 30mm or less. Threaded steerer is 140 mm and head tube is 110 mm. Do any of you guys know if there's anything out there to suit? Cheers.

 

[mk one]

sorry, i dont know but i wouldnt mind seeing some pictures of the build

 

[severnthheathen]

It's all in bits at the moment. If I don't source the low stack headset there won't be a build. UNLESS I swap the P2 threaded forks for a set with a longer steerer.

 

[hamster]

Tange Falcon is 32mm.
http://www.tangeseiki.com/jm/products/h ... se-36.html

This is allegedly 27mm, but that may be for the 1". Mart have managed to save me in the past with low stack headsets.
https://www.winstanleysbikes.co.uk/prod ... NUQAvD_BwE

 

[cce]

i suspect it would have come original with the kona impact/control centre type headset that used a small pinch bolt through the upper race instead of a locking nut, giving the upper part a very low stack.

 

[cce]

see this thread: viewtopic.php?f=1&t=373225