Look Fournales Disc adapter to ISO2000?

The original Fournales part is not ISO, since the face ot the mount does not have the ISO 4mm offset to the dropout face.

All the best,
These are photos of my Fournales with disc mount as supplied new from Hagemeijer, it's not been modified in any way. Brakes fitted are Xtr M975 with a Mavic Crossride & 180mm disc. 20240402_161423.jpg 20240402_161447.jpg 20240402_161500.jpg 20240402_161909.jpg 20240402_170623.jpg 20240402_170757.jpg 20240402_170816.jpg
 
Last edited:
My IGES file for the Fournales fitting adapter to ISO.

Feel free to download from my Dropbox: https://www.dropbox.com/scl/fi/p1aq...t-1.iges?rlkey=atwc56rri2e10saus4jb7zmcx&dl=0

View attachment 835673

It would be a hugely expensive part to have just one made. 3D printed in aluminium would probably be cheaper these days.
I haven't tried this model as a physical part, but could cheaply and easily be printed in plastic to check it first.
The original Fournales part is not ISO, since the face ot the mount does not have the ISO 4mm offset to the dropout face.

A
 
If you can find an original part, you'll either need to find some pre-ISO caliper and hub, or convert the Fournales adapter to ISO like the one I did above.

All the best,
So, this adapter on your file is original like Look? I mean adapter offset and hools. My brake caliper is tightened without any washer.
 

Attachments

  • 20240404_113623.jpg
    20240404_113623.jpg
    285.7 KB · Views: 2
If you can find an original part, you'll either need to find some pre-ISO caliper and hub, or convert the Fournales adapter to ISO like the one I did above.

All the best,
Danson67, i'm not sure to send your file or need to be mofdified first. I dont know differences between ISO non ISO mount.
 
Back
Top