Lockring for M950 bottom bracket SORTED

[Pdid]

I won a set of m952 cranks on ebay and the seller was kind enough to throw in the bottom bracket M950 (serviceable one). I am however missing the lockring from the bottom bracket so has anyone got a spare one knocking about.

Otherwise any other bottom bracket that will do the job?

Cheers
Phil

 

[Pdid]

Re: Lockring for M950 bottom bracket

Will any old bottom bracket lock ring do? I've ordered a spare of ebay for 99p which I think should be the correct thread size.

 

[WD Pro]

Re: Lockring for M950 bottom bracket

I can't see why not, as the bb cup scews into the frame there are only two thread types - so long as you buy the same threaded locking it must screw onto the cup ?

WD

 

[Pdid]

Re: Lockring for M950 bottom bracket

Just to update, the 99p locking from eBay did fit so I'm sorted, only problem is that it probably weighs about the same as the bottom bracket!

I'll be keeping my eyes open for a cheap 109.5 5500 I think.

This is the ring if anyone is in the same situation.

http://www.ebay.co.uk/itm/180814075127? ... 1439.l2649