Leaky mag 21's replacement valve rubbers or complet top caps

[taffy]

Ive finally gotten round to sorting out the Mag21's for my Bontrager and sadly the RH leg is leaking like a good un. they from 30 psi to negligable air pressure in 20 minutes but after about a minute they right leg starts to sag and contract then pul and twist the forks out of line (so much so i actually thought the wewre bent before i discovered how bad the RH lg leak was)

but back to the point

I need a replacement valve core - fancy name for a small almost solid roll of rubber. failing that a new set of top caps.

Any pointers on where to scource them - specifically the rubber valves themselves.

 

[FluffyChicken]

Re: Leaky mag 21's replacement valve rubbers or complet top

see my Signature, or eBay US for a ~£20 original fit it yourself valve.
MAG10 are cheapest to do as you can post and I can post back in a cheaper large letter as the bit needed is not the full cap.
MAG21/20 will be the same cost
MAG30 are a pain in the fecking arse in comparison. currently doing a full fork but changing the valve.

I do have original valves I forgot about but will charge more for them on there own, see ebay cost above..than fitting and testing a custom job. postage and the material is the biggest cost. my time comes practically free. :-( they end up too expensive if I charge actual labour :-(

or you can try fitting presta valves like tubless style ones. oddly mag30 are probably the beset for this but not tried.