Kooka Canti, Kocmo Ti fork, XTR 950 cranks and V-Brake etc

Rahbari

Gold Trader
Feedback
View
Updated on 17.01.2014
For a mate I am selling some parts.

Prices are without shipping. Shipping around the world inkl. Tracking 6.00 EUR (up to 500g) or 9.50 (up to 1kg).

italics means, it is sold.

Pics here:
http://fotos.mtb-news.de/s/64173 and here http://fotos.mtb-news.de/s/53694 and here http://fotos.mtb-news.de/s/46898?page=2 (things that are in the album and not listed here are already sold)


8. Kooka Racha brake levers, Canti, silver, lovely, lowered to 105 EUR

medium_DSC01353.JPG


19. XTR 950 crankset incl. extraction bolts, 170mm, good condtion, red alloy screws, reduced to 60 EUR

medium_DSC01330.JPG


20. XT 732 rear hub, 32h, 130mm width, NOS, but marks from storage in tool box, reduced to 15 EUR
medium_DSC01329.JPG


33. XTR 950 V-Brakes, only 1 pair incl. screws and pads, no Noodles 29 EUR

medium_DSC01404.JPG


42. Chainrings Stronglight, 110/74 BCD, only very few km ridden, like new, only 42 teeth left, 15 EUR

medium_Foto_4.jpg


45. Kocmo Ti fork, german brand, 1", with long 174mm steerer, of which 30-31mm are threaed; 1st Generation, Canti-brakes, approx. 400mm height, only 724g. few marks, 240 EUR; reduced to 199 EUR

medium_Foto_4.jpg

More pics here http://fotos.mtb-news.de/s/46898?page=2

47. Dia-Compe U-Brake, came on my 1990 Zaskar, 8 EUR

medium_Foto_1.jpg


48. Shimano ST-M566A, 3/8-speed, Cantilever (!), right gear display not functioning, otherwise nice, reduced to 25 EUR

medium_Foto_5.jpg


49. ST-M738, 34.9, Top-Pull, only 5 EUR
medium_Foto_1.jpg


51. XTR Hubset, 32 holes, reduced to 59 EUR, in Box, nice condition, the rear hub could use some grease SALE ON HOLD
medium_Foto_2.jpg

More pics here: http://fotos.mtb-news.de/s/53694?page=3

53. Wheelset XT 730/732, Mavic 231, 32h, rims nice condition, hubs nice but front hub could use some grease and decals rear incomplete, incl. original skewers, 100/135, price: 75 EUR; 69 EUR without skewers

large_ShimnoXT730MavicM231silber011.jpg


More pics here (pictures of my seller): http://bikemarkt.mtb-news.de/article/20 ... 231-silber

54. Mavic Crossmax skewers, 1st Generation, have to check if Ti or steel rod, 19 EUR. Pics coming.

55. Syncros Chainring, 46 or 48t, 110 BCD, with packet, was NOS, driven for 10km, no marks on the outer side, 45 EUR. Pics coming


29. XTR-front mech, FD-M961, Top and bottom Pull, 31.8, function and looks nice, red and yellow anodized screws (original ones gone), therefore only 19 EUR
15. XT Seatpost, NOS, 26.6, reduced to 30 EUR, sold to Morgan Kris.
25. Suntour XC-Pro Crankset, good condtion, 46-36-24, 175mm, sold for 50 EUR
50. Ringle Ti-Stix, 3D Violet, Ti-axle, minor fading, few scratches, firm at 105 EUR SOLD!
46. Biketech Cantis "Rimpacker", one pair, excellent condition and complete with everything, incl. straddle holder 50 EUR sold
43. Syncros Cattlehead stem[/b], Ahead, silver, 1 1/8, 150mm, 0 degrees, nice condition, incl. top cap, no star-nut-screw, 25 EUR sold
16. XTR Seatpost, 26.8, Decals nice, in the lower half the anodization has some marks but no deep scratches, 45 EUR SOLD
18. XTR 900 rear mech, nice condition, 32-33T, distance between pulley wheels around 6,75cm, so probobaly Midcage?!, 55 EUR SOLD
21. Pedals, Crank Brothers Eggbeater, around 270g, good condition, lowered to 30 EUR SOLD
24. Kooka crank arms, 175mm, red anodized, good condition, darker as on pics , without spacer for the granny gear, a pair of red Mojo-copies on top, lowered to 100 EUR SOLD
28. Campagnolo Headset, unknown Gruppo, for 1 inch-forks threaded, function and looks nice. 30 EUR SOLD
30. XTR 900 Cantis, front and rear, complete set incl. screws, cables and brake pads (2x XTR, 2x Koolstop); function and looks nice; 55 EUR SOLD to Jonrock
31. XTR 952 rear mech, was used, this adjustment thingie is missing, various red screws and red pulley, 20 EUR
36. XT 732/735 shifter/brake-lever, ST-M091, 7fach, 2-Finger-Canti, looks and function nice top, on each side a small plate is missing, therefore only 25 EUR SOLD38. Syncros seatpost, silver, 26.8mm, 3rd or 4th generation, decals on the rear, 330mm, very nice, 50 EUR
40. ST-M900, shifter/levers. XTR 900, function and looks good - very good, 75 EUR41. left hand side shifter/lever ST-M900, Funktion very good, one screw not original, 25 EUR
3. Syncros Steerhorns, good but some scratches at the side, 25 EUR[/i1. XTR 900 skewers, front and rear, nice, 35 EUR [sold]
2. XTR 900 skewers, front and rear, rubber rings snapped, some marks, still nice 25 EUR
17. XTR 900 front mech, 31.8, Downpull, some marks, function nice, incl. box, 30 EUR
23. Salsa Brakebooster, NOS incl. screws, 40 EUR
5. Titanium Axle, outer diameter of 16mm, length approx.129mm; I presume, 16mm is for a Fat Chance, 40 EUR SOLD FOR 25
11. Titanium-steerer für Tange Switchblade (and maybe other forks), outer diamtere at the fork bridge 28,6mm (so1 1/8 inch); inner diameter approx. 25,6mm; outer diamter in the center of the steerer (inside the frame; weight saving reasons) approx. 27,3mm; Length of the steerer just over 24cm, probably made by high-end-German-manufacturer "Tune", 30 EUR sold to M-Power
44. LX crankarms, FC-M563, 175mm black, nice condition apart from small mark on the non-drive-side below the "LX"-Decal, reduced to 22 EUR SOLD
52. Moonhead Machine Perches, freshly anodized in black (however a bit bluish, just like the XTR 900 colour) together with nice XTR 900 shifters, 170 EUR, SOLD
 
Re: Kooka levers/crank; XTR skewers/mechs/seatpost etc.

Hi,

Am interested in number 18. XTR M900 rear mech.

You still have it? Can you confirm the cage measurement? I really need you to tell me its 67-68mm centre to centre pulley wheels!!! (I think it will be!!!!!)

Big-G.
 
Re: Kooka levers/crank; XTR skewers/mechs/seatpost etc.

Hi Big-G, yes, the distance between the pulley wheels is around 6,75cm. I will dib the mech for you. :)



More stuff added in a few minutes, prices adjusted.
 
Re: Kooka levers/crank; XTR skewers/mechs/seatpost etc.

Interested in Campag headset. Could you send pictures, please? Any idea what the threads are please. Dibs pending would be great, thanks.
Mat
 
Re: Kooka levers/crank; XTR skewers/mechs/seatpost etc.

Hi Mat,

four pics here:
http://fotos.mtb-news.de/s/64173

It is for 1inch threaded forks. No idea which standard threads?! :-(

Gruppo is Record OR or the one below, my mate said. Please check yourself, I am no Campa expert.
 
Re: Kooka levers/crank; XTR skewers/mechs/seatpost etc.

Thanks, will do some web searching for Campag! Best regards, Mat
 
Re: Kooka levers/crank; XTR skewers/mechs/seatpost etc.

Rahbari":18lu5003 said:
Hi Big-G, yes, the distance between the pulley wheels is around 6,75cm. I will dib the mech for you. :)



More stuff added in a few minutes, prices adjusted.

Fantastic i will take it!!!!

Lets d00 it!!!!

Big-G
 
Re: Kooka levers/crank; XTR skewers/mechs/seatpost etc.

@big-g: you have PM

I have now embedded some pics
 
Back
Top