Wanted KONA PROJECT 2 spinner forks

[Oldfellatn3]

Hi

I'm after a pair of good P2's.
Preferably the Spinner ones from 1993 (see pic).
(390mm a to c, 143mm long1-1/8" threaded steerer).
Ones from the years before this would be OK as well.

Also needed is a good silver Control Center/ Impact headset

Foolishly I sold some a while back!

Thanks

 

[RetroRider_IT]

Hello mate,
I have one P2 available,
it's a '93 model, 390mm a/c with Spinner dropouts as you specified but .... it has a 163mm steerer tube
if you are interested I can take the exact measure for the threaded part and send to you some photos
Best regards

 

[Oldfellatn3]

Hi mate.
Thanks for your reply.
If you don't mind taking the trouble that'd be great.
I have very little wiggle room and it could be a matter of just a couple of mm to make it feasible.
Cheers,
Dan

 

[RetroRider_IT]

Hi mate.
Thanks for your reply.
If you don't mind taking the trouble that'd be great.
I have very little wiggle room and it could be a matter of just a couple of mm to make it feasible.
Cheers,
Dan

Hi Dan,
No problem at all
I Will take measures and I Will send PM with photos in a few minutes
Cheers,
Marco