Kona Project 2 fork

[ruttegercarruthers]

....any condition considered so long as structurally sound.

Fork need to be triple butted, threaded 1-1/8th with a 410 mm axle to crown length. Think that means anything from 1994-1996. 1996 gunmetal variety would be ideal. The fork also has to fit an 18" frame, and if memory serves that means a steerer of ~143 mm

Ta

 

[skolioza]

that one? I'm not a Kona Expert, so don't know with it is....

 

[ruttegercarruthers]

Thanks skolioza, these aren't the ones I'm thinking of. Out of interest though, how long is the steerer?

 

[sunchaser]

Not exactly what your after but, these any good?

http://www.retrobike.co.uk/forum/viewtopic.php?t=229276

 

[ruttegercarruthers]

Thanks sunchaser. I need a threaded steerer, would rather not go to the hassle of adding a thread to a fork

Thnking about it though, having a 1996 vintage isn't perhaps so important as I could always repaint whatever I get along with the frame I'm having done. Just needs to be threaded 1-1/8th, from an 18" frame, triple butted and structurally sound. I've amended the ad accordingly

Ta

 

[MikeyS]

Hi,
I've got a 11/8th Velocity quill stem up for sale here:

http://www.retrobike.co.uk/forum/viewtopic.php?t=192606&start=0

I'm not sure if it is 94-96 vintage though. Let me know if you are keen or want more detailed pictures than the one shown.

 

[ruttegercarruthers]

Thanks Mikey, I've sent you a PM

 

[highlandsflyer]

Re: Kona Project 2 fork and Velocity Stem.....

....any condition considered so long as structurally sound.

Fork need to be triple butted, threaded 1-1/8th with a 410 mm axle to crown length. Think that means anything from 1994-1996. The fork also has to fit an 18" frame, and if memory serves that means a steerer of ~143 mm

If you have either or both let me know

Ta

Money?

 

[ruttegercarruthers]

Re: Kona Project 2 fork and Velocity Stem.....

....any condition considered so long as structurally sound.

Fork need to be triple butted, threaded 1-1/8th with a 410 mm axle to crown length. Think that means anything from 1994-1996. The fork also has to fit an 18" frame, and if memory serves that means a steerer of ~143 mm

If you have either or both let me know

Ta

Money?

...in exhange for a fork? Yes. how much depends on condition and is up to the seller really Now sorted for stem (cheers Mikey!)