Withdrawn Kona Lavadome/Cindercone 1994?

Spanky22b

Kona Fan
Feedback
View
Now i've got that 93 Cindercone off retrobikeguy i don't need this so time to move this on which i believe is a 1994 Lavadome/Cindercone and this is how i've came to that conclusion,you ready 😁 because of the seatclamp!
I tried a seatclamp off a 93 Kona and it's not fitting so tried a newer one from 94 Kona and fits perfectly or you could decipher the serial number when you get it. But i believe it's a 94 onwards Kona.
The frame has been resprayed in the past and looks like it's had a repair on the dropout but apart from that it's good to go for a project,the stickers i put on from some spares so don't try and work the year out from those.
Comes with the Marzocchi xc51 forks which it would've had in 94 which go boing.
It will come with the seatclamp and a Velocity stem i just didn't take a photo with them on and also the headset, it takes a 26.6mm seatpost and is a 19 inch frame.
A great project for someone.

Pricewise £85 posted and PayPal friends and family please also UK buyers only.
And if you don't want this and want a 20 inch 1993 Kona Kilauea mine will be up for sale later today ish.

Usual thing show interest here first before sending a private message.

Cheers
 

Attachments

  • IMG_20230205_151326_edit_357973123259959.jpg
    IMG_20230205_151326_edit_357973123259959.jpg
    492.2 KB · Views: 62
  • IMG_20230205_151925_edit_358173002096908.jpg
    IMG_20230205_151925_edit_358173002096908.jpg
    355.7 KB · Views: 61
  • IMG_20230205_151902_edit_358157390866702.jpg
    IMG_20230205_151902_edit_358157390866702.jpg
    509.8 KB · Views: 43
  • IMG_20230205_151801_edit_358129859217227.jpg
    IMG_20230205_151801_edit_358129859217227.jpg
    290.3 KB · Views: 42
  • IMG_20230205_151731_edit_358115850078167.jpg
    IMG_20230205_151731_edit_358115850078167.jpg
    259.5 KB · Views: 54
  • IMG_20230205_151358_edit_358019332988598.jpg
    IMG_20230205_151358_edit_358019332988598.jpg
    664.4 KB · Views: 49
  • IMG_20230205_151550_edit_358086865886504.jpg
    IMG_20230205_151550_edit_358086865886504.jpg
    192.6 KB · Views: 55
  • IMG_20230205_151441_edit_358053207134426.jpg
    IMG_20230205_151441_edit_358053207134426.jpg
    712.2 KB · Views: 56
  • IMG_20230205_151510_edit_358071702955778.jpg
    IMG_20230205_151510_edit_358071702955778.jpg
    629.6 KB · Views: 63
  • IMG_20230205_151415_edit_358038383708387.jpg
    IMG_20230205_151415_edit_358038383708387.jpg
    707.6 KB · Views: 69
A couple more photos with the seatclamp and stem and of the serial number.
 

Attachments

  • IMG_20230206_215940.jpg
    IMG_20230206_215940.jpg
    414.2 KB · Views: 12
  • IMG_20230206_220100.jpg
    IMG_20230206_220100.jpg
    335.6 KB · Views: 12
  • IMG_20230206_220107.jpg
    IMG_20230206_220107.jpg
    340.9 KB · Views: 12
From what I can see, all the konas in this thread are using the impact headset.
Do you have experience of a standard 1 1/8 threaded headset on any of your builds …with project two forks on a 19inch frame?
 
From what I can see, all the konas in this thread are using the impact headset.
Do you have experience of a standard 1 1/8 threaded headset on any of your builds …with project two forks on a 19inch frame?
The stack height of an Impact headset is really low, like 32mm if I remember correctly. That limits your available options.
 
  • Like
Reactions: enc
The stack height of an Impact headset is really low, like 32mm if I remember correctly. That limits your available options.
yes, that is what im finding. i judt tried a threaded Token 1 - 1/8 but its about 8-10mm too short :-(
 
Back
Top