firemountain
Dirt Disciple
Hi i got this kona hahanna on ebay this week paid £70.00 will keep it as near to factory condition as possible the only problem is getting canti brakes cables with the cover on them.
The front wheel has been re build with DT swiss spokes so i now have both wheels the same with the rims from the factory weinmann BCX-3 bontrager(Shimano ES HUBS) with a equilibrium tyres in perfect condition on the front the rear has weinmann bontrager with a propulsion tyre in perfect condition.
Next job is to strip the bike and clean all the parts polish the frame with T-cut and Auto Glym resin polish.
Fame full Tange Cromo throughout
Fork New Project two sports cromo with new drop out
Head set YST 1 inch
Cranks Shimano A10 round SG-X rings 46/36/26
Pedals shimano DX
Bottom Bracket Shimano BB-UN55
Freewheel Shimano 12-28 Hyperglide 7 speed (replaced old one and chain)
Shifters Shimano Altus A20 / Shimano Altus A20
Frount Derailleur Shimano Altus A20
Rear Derailleur Shimano Altus A20
Handlebar Aluminium 220g(6061)
Stem Joe Murry Vetocity cromo drop bolt (300g)
Grips Kona
Brakes Shimano C10 Multi condition cantilevers
Brake Levers Shimano C10
Seat post 350mm alloy
Seat clamp/QRKona aluminium(21g)
Saddle replace with a retro 1993 kona
Joe Murray Combo Cage and bottle ( complete kit )
Will add my own images as i go on with the project the first two are from the listing on ebay
I have been looking for a 1993 hahanna for 3 years most are over priced or in a poor condition i wanted the frame to be good as i did not want to have to re-spray would cost to much.
This now completes my collection of Kona Bikes
1988/89 Fire Mountain
1992 Explosif
1993 Hahanna
1997 Muni-Mula
1998 Cinder Cone
2004 Scrap
2009 Kahuna
The front wheel has been re build with DT swiss spokes so i now have both wheels the same with the rims from the factory weinmann BCX-3 bontrager(Shimano ES HUBS) with a equilibrium tyres in perfect condition on the front the rear has weinmann bontrager with a propulsion tyre in perfect condition.
Next job is to strip the bike and clean all the parts polish the frame with T-cut and Auto Glym resin polish.
Fame full Tange Cromo throughout
Fork New Project two sports cromo with new drop out
Head set YST 1 inch
Cranks Shimano A10 round SG-X rings 46/36/26
Pedals shimano DX
Bottom Bracket Shimano BB-UN55
Freewheel Shimano 12-28 Hyperglide 7 speed (replaced old one and chain)
Shifters Shimano Altus A20 / Shimano Altus A20
Frount Derailleur Shimano Altus A20
Rear Derailleur Shimano Altus A20
Handlebar Aluminium 220g(6061)
Stem Joe Murry Vetocity cromo drop bolt (300g)
Grips Kona
Brakes Shimano C10 Multi condition cantilevers
Brake Levers Shimano C10
Seat post 350mm alloy
Seat clamp/QRKona aluminium(21g)
Saddle replace with a retro 1993 kona
Joe Murray Combo Cage and bottle ( complete kit )
Will add my own images as i go on with the project the first two are from the listing on ebay
I have been looking for a 1993 hahanna for 3 years most are over priced or in a poor condition i wanted the frame to be good as i did not want to have to re-spray would cost to much.
This now completes my collection of Kona Bikes
1988/89 Fire Mountain
1992 Explosif
1993 Hahanna
1997 Muni-Mula
1998 Cinder Cone
2004 Scrap
2009 Kahuna
