Klein, XT, Thompson Onza

[stevebe]

Prices Include UK postage

XT M734 1 set complete cantilever £11
STX BR MC32 1 set complete cantilever £9
XT 7speed cassette?? 7/10 £7
XT FM M739 31.8mm clamp bottom pull £10
NOS XT FD E-Type BB Mount M760 bottom pull £12
STX MC34 7x3-speed combos £25 - nice
KLEIN Vinyl decals (From trek) £12
KLEIN MC2 headset spacers £3,50 each
KLEIN MC2 original equipment headset tool £18.00
KCE alloy headset 1 1/8steerer 25.4 bars 130mm on centres £7
Brake studs MC10 thread £8 pair
Thompson Elite 31.6mm cut to 300mm 6/10 £14.00
Onza Bar ends with Onza plugs £7 ???

Dibs on here first then a PM.
Paypal gift or a little bit to cover their fees

 

[Double-E F]

Re: Bits, Klein,xt, etc

Interested in the headset, got a pic?

E

 

[stevebe]

Re: Bits, Klein,xt, etc

headset pic on its way to you.

 

[Double-E F]

Re: Bits, Klein,xt, etc


Forgive my ignorance, but is that a head set and a reducer, or just a reducer?
E

 

[stevebe]

Re: Bits, Klein,xt, etc

Its just that a headset with a reducer but you can take the reducer of

 

[stevebe]

Re: Klein,XT, Rock Shox and others

rubbish weather bump

 

[FluffyChicken]

Re: Klein,XT, Rock Shox and others

What travel is the damper ? (1998 ?)
Dummy looks longer, what travel is that for ?

 

[drystonepaul]

Re: Klein,XT, Rock Shox and others

Also interested in the Judy damper. Will it fit a 1996 Judy XC?

 

[stevebe]

Re: Klein,XT, Rock Shox and others

I bought the Judy bits on here for my 96 SLs which were the same length. I have measured the units and including the retaining bolts in the picture they are both 222mm.
This fitting would have worked on my SLs but I managed to get new seals for the original damper so never used them - hope this is helpful. Wasn't sure about the 1998? comment but all I can say is they look the same as my 96sls apart from the external adjusting bolt which is changed by allen key rather than the SLs red knurled nut.

 

[FluffyChicken]

Re: Klein,XT, Rock Shox and others

The knurled ribbing on the end was a feature in the 1998 improved damper. Might be a cross head screw in the other end, this eased refilling the oil.

P.S. I might have a chat to see if you can rejuvenate some old MAG21 seals