Just repainted and stickered a 1995 Kona Kilauea 19"

AshevilleRetro

Retro Newbie
Bike was very rough when I got it last month. Looks fairly good for an automotive rattle can paint job. Wet sanded down to metal 80%, two coats primer, 2 coats pearl white, stickers, then three light coats clearcoat. Used Dupli-color lacquer. Waiting 48 hours and maybe will wax with a light compound before assembling?
 

Attachments

  • 20221230_150321.jpg
    20221230_150321.jpg
    304.7 KB · Views: 120
  • 20221230_113700.jpg
    20221230_113700.jpg
    424.5 KB · Views: 116
  • 20221230_113653.jpg
    20221230_113653.jpg
    428.3 KB · Views: 73
  • 20221230_150602.jpg
    20221230_150602.jpg
    385.2 KB · Views: 77
  • 20221230_150532.jpg
    20221230_150532.jpg
    280.9 KB · Views: 80
  • 20221230_150512.jpg
    20221230_150512.jpg
    287.9 KB · Views: 83
  • 20221230_150452.jpg
    20221230_150452.jpg
    370.2 KB · Views: 84
  • 20221230_150359.jpg
    20221230_150359.jpg
    442.6 KB · Views: 82
  • 20221111_133256.jpg
    20221111_133256.jpg
    754.5 KB · Views: 125
Great result! 9 out f 10. I can still see orange peel though. Layer thickness of base coat (and clear coating) could have been thicker for even better results, a super mirror smooth surface and perfection.
 
Looks fantastic 😍

I'd wait a bit longer if you can bear it. I'm always very impatient wanting to assemble ASAP. I've regretted this decision more than once.

Not to a severe fault but would have rather just given a bit more cure time on some past resprays if I was to do it over....

I'd wait a few days to be safe personally
 

Latest posts

Back
Top