Jimbog’s 92 Roberts D.O.G.S B.O.L.X build

jimbog

Senior Retro Guru
After waiting eagerly for the postman this morning, my new build project has arrived. Looking forward to getting this one built up so I’m spending some time today digging through my various parts to see what I have and what I will need.
Groupset will be mainly m900 XTR. Other bits to be decided.
Thanks to @AGT for selling 👍🏼
 

Attachments

  • IMG_9735.webp
    IMG_9735.webp
    730.8 KB · Views: 29
  • IMG_9736.webp
    IMG_9736.webp
    447.7 KB · Views: 31
  • IMG_9737.webp
    IMG_9737.webp
    482.7 KB · Views: 24
  • IMG_9738.webp
    IMG_9738.webp
    563.7 KB · Views: 30
Last edited:
Put together some bits and bobs for the build this afternoon. Not sure whether to use the Middleburns or polish up the M900 XTR chainset. Any thoughts? Swaying towards middleburns.
 

Attachments

  • IMG_9755.webp
    IMG_9755.webp
    317.1 KB · Views: 5
  • IMG_9754.webp
    IMG_9754.webp
    298.2 KB · Views: 4
  • IMG_9753.webp
    IMG_9753.webp
    269.5 KB · Views: 4
  • IMG_9752.webp
    IMG_9752.webp
    181.1 KB · Views: 5
  • IMG_9751.webp
    IMG_9751.webp
    331.6 KB · Views: 6
  • Like
Reactions: JCS
Fitted a new Tange Seiki Falcon sealed bearing headset this afternoon. Just need to sort out the spacer stack. The original Roberts stem and Reynolds bars are on their way to me later this week.
 

Attachments

  • IMG_9756.webp
    IMG_9756.webp
    131.8 KB · Views: 6
  • IMG_9758.webp
    IMG_9758.webp
    129.2 KB · Views: 5
  • IMG_9757.webp
    IMG_9757.webp
    197.1 KB · Views: 5
I can get your M900 chainset polished and logos added if needed. AGT had them on the build he did. Cost is £60


I’ve also got a very nice -M900 cassette
For sale on here too if you are looking for bits
 
I can get your M900 chainset polished and logos added if needed. AGT had them on the build he did. Cost is £60


I’ve also got a very nice -M900 cassette
For sale on here too if you are looking for bits
I’ll decide what I’m doing with the cranks first mate and let you know if interested.
Might have a look at your cassette but I’ve dropped so much ££££ on builds over the last few months. That being said, I don’t want to scrimp on this build as it deserves a decent level of detail/spec.
 
Yeh let me know mate.

The cranks take around 2 weeks at moment to be done and back to you if you decide. It’s a good cheap way to refresh a pair.

I’ve two cassettes on here. 1 is worthy of your build and 1 is cheap but tatty. Let me know if you fancy either as it deserves the best I think AGT build was lovely
 
Back
Top