is there a standard pitch for M1O?

[Harryburgundy]

My newly arrived M10 brake studs have a course pitch...but my Stumpjumper requires a fine pitch.
Is one standard?

 

[02gf74]

Looks like not. Coarse 1.5 which appears to be thr "standard" as you refer.
Fine is 1.25, 1.0 and 0.75

 

[Harryburgundy]

Re:

Oh arse! Another £7.50 wasted. I had thought M10 would be 1.25 pitch

 

[Harryburgundy]

Re:

Mmm...I have not measured the pitch yet but according to sellers description the pitch is 1.25.
I need super fine?

 

[02gf74]

Just popped into my garage and regular bog standard plain vanilla M10 bolts are 1.5 mm.

Sounds like you need fine, the terms fine superfine etc do not appear to be used consistently.

Just make sure you specify the thread pitch.

 

[Harryburgundy]

Re:

I downloaded a sheet with printed pitch examples and compared. Def need 1.0
Standard seems to be 1.25

 

[GSB]

Same pitch as a 2004 Toyota MR2 exhaust manifold stud.

Just a bit of trivia, unlikely to come up in a pub quiz, but you never know...

 

[Dead Rats]

Surly use 1.0mm M10 bosses on their frames IIRC

 

[KermitGKona88]

Re:

Just a thought wouldn't it be quicker easier and less hassle to just run a 1.25 pitch M10 tap through them :?:

 

[GSB]

Not if it's already got an m10 thread in there. All you'll do is remove more material and significantly weaken the female thread.