Hope XC4 brakes, and Easton NOS

Benandemu

Retrobike Rider
Gold Trader
Feedback
View
I've decided to part company with these and return to V brakes on the Mount Vision Pro.
They are the best set of XC4's I've seen other than when they were new in the shops.
The condition is excellent, and the pads aren't bedded in yet either.
I replaced all the mounting, and caliper bolts with Titanium ones, and then used a +20mm Hope adapter so that a 150mm rear disc could replace the 130mm.
I will include a matching pair of 150mm 5 bolt rotors in the sale, plus 2 spare 130mm rears and a spare 160mm disc that could be used if a +10mm adapter was used on the front.
I will also include some brand new Fibrax sintered pads too.
141cm rear hose and 91cm front hose.


The only issue that would tell you these aren't NOS is that the adjuster caps are very slightly scratched. The levers look like they've never been pulled!

You really won't find better than these!

I'm looking for £110 posted for this little lot please

I will ship internationally, but postage will vary.

photo-29.jpg


photo-28.jpg


photo-21.jpg


photo-20.jpg


photo-30.jpg


Easton (brand new and unused) EA90 stem 100mm and 0 degree rise with 31.8mm clamp. This is mint and stupidly light.

£40 posted (cost me £50 last month)


Easton EA90 carbon bars (again, brand new and unused) 31.8mm and 580mm wide with a 3 degree sweep. These are mint and very light. Sub 120g

£40 posted (cost me £48 last month)


photo-18.jpg



photo-19.jpg



Thanks for looking
 
Back
Top