Hope wheels, Burley Bee, Islabikes, Middleburn, XTR + stuff!

[Tommylurve]

OK having a little clear out to make way for more stuff, pics here:

http://www.flickr.com/photos/67727277@N ... 742511663/

Thomson 25.4mm 100mm with 5deg rise black stem, lovely nic. £30 posted

Crank Brothers Mallet C pedals in grey. Paint worn in places but still perform great £15 posted

Shimano ?Lx pedals £8 posted

Halfords bike carrier seen better days but still does the job £Karma (free) collected


-Hope Pro2 on DT swiss EX540 wheels lovely bomb proof but yet relatively light weight wheels. A few nics to the rear rim but superficial. Hubs run smooth with the reassuring buzz that Hopes give, only defect is some slight marking on the free hub from the cassette but again does not affect performance. Comes with Schwalbe Racing Ralph 2.1 EVO snakeskin on the back and Racing Ralph 2.25 on front. ROTORS NOT included soz.
Price is £110 plus postage SOLD
-Pair of Schwalbe stelvio NIB 700 x 23c with green stripe £20 postedSOLD
Schwalbe Ultremo ZX NIB 700 x 23c Black £15SOLD
-Burley Bee child Trailer. Kids have grown out of this now but its in great working condition. It has a few scuffs on the fabric but nothing affecting safe use. Easy and quick to assemble, lightweight and a great design. Fits one or two children. These are a fortune new. Pick up only or can drop in NE London.£100 SOLD
-Middleburn RS7 ISIS 170mm black crankset and spider 5 bolt, think its for a double ring set up. A couple of light scuffs close up but otherwise a great used condition.
£55 posted SOLD
-XTR m952 rear mech with RED KCNC jockey wheels not the black ones in the group pic £25 SOLD
-Surly SS cog 19t 3/32' £10 posted SOLD
-Fizik Pave leather saddle with Ti rails and spare plastic blue bits for underneath £12 SOLD

 

[OldFatTi]

Re:

Ill take the Pave saddle pending pics/condition? Couldnt see it on your link?

 

[Tommylurve]

Re: Re:

Ill take the Pave saddle pending pics/condition? Couldnt see it on your link?

Added pics earlier but they seem to have ended up in the "photo stream". Click "view all sets" and then on "photo stream" and they're there.
After all that someone else has first refusal I'm afraid :roll: .
I'll let you know
T

 

[OldFatTi]

Re:

:cry: ok dude I'll take it if poss, let me know

 

[BobCatMax]

Re: Hope wheels, Burley Bee, Islabikes, Middleburn, XTR + st

if for any reason at all the middleburns fall through, could i be next up please? ta very much

 

[dieselfanman]

Re:

Is the XTR rear mech a short, medium or long cage? I'll take it so long as it's not short cage,

dieselfanman

 

[Tommylurve]

Re: Re:

Is the XTR rear mech a short, medium or long cage? I'll take it so long as it's not short cage,

dieselfanman

You know I'm not sure I'm sure it's not a long cage, how do I find out? There's no marking on it but there is a small sticker with MW on?? I'll do a bit of research...

Bobcat max you're next in line

 

[dieselfanman]

Re:

I have a short cage in front of me, and the centre of the jockey wheels are 48 mm apart, if the jockey wheels are further than this apart I'd assume it's a medium? :?

I have a 12 - 32T cassette I want to use and this short mech is not big enough,

dieselfanman

 

[Tommylurve]

Re:

I have a short cage in front of me, and the centre of the jockey wheels are 48 mm apart, if the jockey wheels are further than this apart I'd assume it's a medium? :?

I have a 12 - 32T cassette I want to use and this short mech is not big enough,

dieselfanman

Just measured it and get 66mm :xmas-big-grin:

 

[dieselfanman]

Re:

Perfect, I'll take it, PM you paypal details and I'll send the money straight away,

Cheers

dieselfanman