coreygun
Retro Guru
Middleburn RS3 crankset - £160
In excellent condition. Includes cranks, chainring and Shimano XT BB - UN72
BR-M960 In pretty good overall condition. Pads will need replacing. A few scuffs on the brake levers.
Shimano XT gears - £50
Good working condition. Shimano 9 speed XT gears - derailleur, shifter, chain, CS-M750 cassette 11-32t
FSA Orbit XL II headset and FSA Conix - £15
Overall really nice condition, complete. Top bearing is pretty good, lower one is slightly worse but still life left in it. FSA Conix compression top cap included.
X-Lite G-Force handlebars, CNC stem & grips - £25
Some old X-Lite bars in garish orange, Azonic Shorty style CNC stem, plus some modern blue lockon grips in a nice contrasting colour to the garish orange.
All available on ebay too.
Prices collected from Surrey, or posted for £3.50 to £9 +Paypal fees.
------------------------------------------------------------------
SOLD *** Marzocchi Z1 BAM forks - £140
Excellent condition, serviced a year ago not had much use. Stanchions are spotless, work well, adjusters work.
Hard to tell it's been used, pretty much immaculate.
SOLD *** Hope Ti Glide wheels - £120
Some lovely old Hope Ti Glide hubs on Mavic rims (unsure which model). Bearings are good, wheels spin true, freehub engages well. Rear blue Hope skewer, unbranded front skewer. There's a lot of grease by the freehub, and if you cleaned it up they'll look near perfect.
In excellent condition. Includes cranks, chainring and Shimano XT BB - UN72
- 175mm crank arms
- 94/58 BCD
- 42t chainring
BR-M960 In pretty good overall condition. Pads will need replacing. A few scuffs on the brake levers.
Shimano XT gears - £50
Good working condition. Shimano 9 speed XT gears - derailleur, shifter, chain, CS-M750 cassette 11-32t
FSA Orbit XL II headset and FSA Conix - £15
Overall really nice condition, complete. Top bearing is pretty good, lower one is slightly worse but still life left in it. FSA Conix compression top cap included.
X-Lite G-Force handlebars, CNC stem & grips - £25
Some old X-Lite bars in garish orange, Azonic Shorty style CNC stem, plus some modern blue lockon grips in a nice contrasting colour to the garish orange.
- Stem is about 70mm long with about 20mm rise.
- Bars are 66cm wide uncut. Rise looks to be about 30mm at the bend, and 50mm at the grips.
All available on ebay too.
Prices collected from Surrey, or posted for £3.50 to £9 +Paypal fees.
------------------------------------------------------------------
SOLD *** Marzocchi Z1 BAM forks - £140
Excellent condition, serviced a year ago not had much use. Stanchions are spotless, work well, adjusters work.
- 26" wheel
- Disc & V brake mounts
- 100mm travel
- 203mm steerer
Hard to tell it's been used, pretty much immaculate.
SOLD *** Hope Ti Glide wheels - £120
Some lovely old Hope Ti Glide hubs on Mavic rims (unsure which model). Bearings are good, wheels spin true, freehub engages well. Rear blue Hope skewer, unbranded front skewer. There's a lot of grease by the freehub, and if you cleaned it up they'll look near perfect.
Attachments
Last edited: