MuchAlohaNui
Senior Retro Guru
…Hope Pro 4 135 mm rear hub assembly (or we both keep the freewheels too).
This one here is the X12 variant with the 11-spd Shimano/Sram freehub. 32 hole. The freehub is mechanically good. Cosmetically a little bit of aluminum packing on the leading edge on a few of the splines. The hub itself could use new bearings (x2 same part number) some time down the road at your discretion. I just want to be clear that there is an ever so slight grittiness to one of the bearings but I cannot determine which one. Everything else on the hub is good.
If you have a hub to swap, please let me know! I’ll accept any color but black! Ideally purple for purple! Thank you!
This one here is the X12 variant with the 11-spd Shimano/Sram freehub. 32 hole. The freehub is mechanically good. Cosmetically a little bit of aluminum packing on the leading edge on a few of the splines. The hub itself could use new bearings (x2 same part number) some time down the road at your discretion. I just want to be clear that there is an ever so slight grittiness to one of the bearings but I cannot determine which one. Everything else on the hub is good.
If you have a hub to swap, please let me know! I’ll accept any color but black! Ideally purple for purple! Thank you!
