Holdsworth Frame Numbers

066857 frame number. I am trying to identify model as it has internal cabling along top tube, in at one end and out the other and I have found no models with this in the catalogues? I do wonder if it has been resprayed at some point as 531 stickers look newish.
 

Attachments

  • 39D1EE44-09EB-41C2-BB76-419287D2B419.jpeg
    39D1EE44-09EB-41C2-BB76-419287D2B419.jpeg
    443 KB · Views: 8
  • F981BD18-2CFF-4366-AE8D-F4CD2D1BC4EB.jpeg
    F981BD18-2CFF-4366-AE8D-F4CD2D1BC4EB.jpeg
    480.5 KB · Views: 9
  • 329C1772-2563-4DF0-B290-783DDC50652C.jpeg
    329C1772-2563-4DF0-B290-783DDC50652C.jpeg
    980.8 KB · Views: 8
Hi all,
Looking for help identifying my late grandfather's old Holdsworth please.

Serial number (stamped on rear drop-out):
C1178

From what I've found on Norman Kilgariff's website, the bike could be a Cyclone from late 50's to early 60's, but the serial number doesn't seem to confirm that.
It has NERVEX and some information on the BB so that should confirm the Nervex lug design and help with ID

Any help would be much appreciated!
 

Attachments

  • 20230522_112100.jpg
    20230522_112100.jpg
    371.2 KB · Views: 13
  • 20180907_132911.jpg
    20180907_132911.jpg
    1.2 MB · Views: 14
  • 20230518_131751.jpg
    20230518_131751.jpg
    467.3 KB · Views: 12
  • 20230518_131742.jpg
    20230518_131742.jpg
    386.2 KB · Views: 11
  • 20230522_141527.jpg
    20230522_141527.jpg
    354.9 KB · Views: 7
  • 20180907_132506.jpg
    20180907_132506.jpg
    1.3 MB · Views: 8
Hi all,
Looking for help identifying my late grandfather's old Holdsworth please.

Serial number (stamped on rear drop-out):
C1178

From what I've found on Norman Kilgariff's website, the bike could be a Cyclone from late 50's to early 60's, but the serial number doesn't seem to confirm that.
It has NERVEX and some information on the BB so that should confirm the Nervex lug design and help with ID

Any help would be much appreciated!
Update...
It appears it may not be a Holdsworth -
"frame number doesn’t fit for Holdsworth system. Second, Holdsworth used the fishtail Nervex lugs for the early/mid 50‘s Cyclone, this are the earlier horns version. All in one it looks a like an Viking Severn Valley, an Stallard or maybe an Harry Quinn...."
Based on this I might make a new post which isn't Holdsworth exclusive.
 
No problems on the measuring, design engineer by trade, no phone app in sight....
Will have to do this when I go over to visit. Which as I live on the outskirts of Bedford may be a little way off.
Thanks for all the input.

David
Still not measured the frame but interestingly have non matching fork and frame numbers..... But it's also only a 3 digit serial.....also had an extra mod with the braze on hanger. Some other details for reference. Now the frame is stripped will measure. Will use dodgy top tube as reference. Any recommendations for frame repairs. I have approached Ellis-Briggs PXL_20230620_184333087.jpg PXL_20230620_184328468.jpg PXL_20230620_184244555.jpg PXL_20230620_184132842.jpg PXL_20230620_183940819.jpg PXL_20230620_184053289.jpg PXL_20230620_184025441.jpg
 

Attachments

  • PXL_20230620_183913602.jpg
    PXL_20230620_183913602.jpg
    302.5 KB · Views: 3
  • PXL_20230620_184413198.jpg
    PXL_20230620_184413198.jpg
    425.8 KB · Views: 3
Still not measured the frame but interestingly have non matching fork and frame numbers..... But it's also only a 3 digit serial.....also had an extra mod with the braze on hanger. Some other details for reference. Now the frame is stripped will measure. Will use dodgy top tube as reference. Any recommendations for frame repairs. I have approached Ellis-BriggsView attachment 751683View attachment 751684View attachment 751685View attachment 751686View attachment 751687View attachment 751688View attachment 751689
Yikes, that wrinkled downtube looks pretty terminal:(
 
Hi everyone, I picked this up a couple of months ago in amongst a load of other bits and bobs and there’s something about it that makes me think it’s special somehow and worth restoring. I’ve checked the frame number but I think that was actually related to Claud Butler instead of Holdsworth. I was also thrown off the scent by the cable attachment along the top tube and the forks - I did remove them and they’re stamped with the the same number as the BB shell. Serial number is 69566.
Any help appreciated.

Andy


IMG_5841.jpeg
 

Attachments

  • IMG_5842.jpeg
    IMG_5842.jpeg
    589.9 KB · Views: 6
  • IMG_5843.jpeg
    IMG_5843.jpeg
    546.6 KB · Views: 7
  • IMG_5844.jpeg
    IMG_5844.jpeg
    416 KB · Views: 8
Back
Top