Gtpulse
Dyna-Tech Fan
Having a sort out, hung on to this for a very long time and haven’t had it built up for ages now.
Did have LE decals, those came off when I gave it a quick polish earlier on. It’s had a quick go over, could come up nicer especially with new decals.
Rockshox Indy S included, they appear to work ok but I’ve never ridden them. I was going to build it up with these and don’t need them for anything else.
There are a couple of things to point out, neither made any difference when built/rode it. By way of a small confession of cruelty to bicycles I did have this built up in the early 2000s with hydraulic disc brakes and 20mm bolt through front wheel…….this meant I filed a bit off the under top tube cable guide to fit a hose for the rear brake, also filed off the non drive side mudguard eye so I could fit a brace for the rear caliper. I’ve used it absolutely fine since then just thought I’d mention it.
There is evidence of minor chainsuck, you can tell it had a protector on there at some point. No gouges just some hazing. I’ve tried to photo any cable rub and there’s a tiny ding in the top tube.
£125 including the forks. Don’t really want to split them thanks. Can post if needed.
Did have LE decals, those came off when I gave it a quick polish earlier on. It’s had a quick go over, could come up nicer especially with new decals.
Rockshox Indy S included, they appear to work ok but I’ve never ridden them. I was going to build it up with these and don’t need them for anything else.
There are a couple of things to point out, neither made any difference when built/rode it. By way of a small confession of cruelty to bicycles I did have this built up in the early 2000s with hydraulic disc brakes and 20mm bolt through front wheel…….this meant I filed a bit off the under top tube cable guide to fit a hose for the rear brake, also filed off the non drive side mudguard eye so I could fit a brace for the rear caliper. I’ve used it absolutely fine since then just thought I’d mention it.
There is evidence of minor chainsuck, you can tell it had a protector on there at some point. No gouges just some hazing. I’ve tried to photo any cable rub and there’s a tiny ding in the top tube.
£125 including the forks. Don’t really want to split them thanks. Can post if needed.
Last edited:
