Karma GT U-brake seatpost cable guides

Thanks to Brandon Suprachrgd82 for sending 8 of these over.
Arrived today with the front cable hanger.
list below where the 8 people that replied
1.Tc
2.Mod-master
3.Stx-rc plus front hanger
4.Once A hero
5.ishaw
6.Phillb
7.raidan73
8.bawgixer

If people can check what frame ur looking to fit it to as these are the smaller of the 2 diameters available and fit spot on with the steel frames as I’ve show on Karakoram and avalanche.
But on my zaskars 91 and 97 they are 2 stretched to line up the securing nut n bolt.
U may get away with taking some off the rear of the bracket to get the bolt holes to line up.

If the guys in the list above message me ur info I can sort out getting them to u.
IMG_8408.webp IMG_8407.webp IMG_8406.webp IMG_8409.webp
Cheers Paul
 
Mine arrived today, many thanks to Brandon (Suprachrgd82) and Paul (Bawgixer). You've made an old Team Avalanche very happy :)

 
No worries, good too see them back out in the world making bikes whole again. I managed to dig up 5 more if we missed anyone.
Are they all the same size? I had to turn down one from the batch received as they were for the steel frame bikes, and I could do with one for the larger diameter aluminium seat tubes.
 
I believe they are all the smaller diameter as they mic’d at 27.5 to 28.5mm as they sit in the bin fully clamped. Obviously one would open them up and snug it to varying size seat tubes of 28mm or greater. I really assumed that one size was intended fit all bikes Being that they are flexible plastic.

I just got a PM from a German member. If he’s close to anyone who needs a cable guide, I’d like to send the lot of ‘em in one package and have someone accross the pond distribute to save everyone shipping charges. Are y’all near Germany?
 
Apologies for bringing back an old thread, but @Suprachrgd82 do you still happen to have any of these cable guides? I'm also located in the US, and am looking for a guide to get my Karakoram project up and running!
 
Back
Top