GT STS £250 BIN
- Thread starter kase1983
- Start date
johnnyp3000
Devout Dirtbag
I think it is an LTS. 1996 carbon LTS, so pretty rare.
Yep it's a LTS Carbon and it looks bad and downright sad 
Rare it is as it's GT's first production Thermoplastic mountain bike
Components are awful, all that remains of the original XT parts are the rear mech (which looks strange) and possibly the V brakes. But it also looks like this frame might have a couple of other problems.
No front mech and looking at the frame I can't see the mount for the mech. This actually screws onto the frame and if it ain't there you are going to be limited to a maximum of 9 gears. You can see what I'm talking about on this pic. The mount is above the BB
Very very very unlikely you will be able to source a replacement part. I would have a go trying to fabricate something using a seat tube from an old frame or, you may be able to fit an E type front mech. Not 100% sure that this is possible though .
Also what's going on with the cable routing??? Looks terrible and is wrong should be directed internally unless there's a problem there Possibly the owner doesn't have a clue and has missed the holes situated on the headtube and/or does not know what they're for.
Looking at the faults, would I buy it? Yes As long as that carbon is OK it won't take much to get this looking good. Even if the bearings are shot these are readily available. Gil_m will sort you out some decals. You can get some decent XT M739 components and fork stuck on there and you'll be nearly there.
Rare it is as it's GT's first production Thermoplastic mountain bikeComponents are awful, all that remains of the original XT parts are the rear mech (which looks strange
) and possibly the V brakes. But it also looks like this frame might have a couple of other problems.No front mech and looking at the frame I can't see the mount for the mech. This actually screws onto the frame and if it ain't there you are going to be limited to a maximum of 9 gears. You can see what I'm talking about on this pic. The mount is above the BB
Very very very unlikely you will be able to source a replacement part. I would have a go trying to fabricate something using a seat tube from an old frame or, you may be able to fit an E type front mech. Not 100% sure that this is possible though
.Also what's going on with the cable routing??? Looks terrible and is wrong should be directed internally unless there's a problem there
Possibly the owner doesn't have a clue and has missed the holes situated on the headtube and/or does not know what they're for.Looking at the faults, would I buy it? Yes
As long as that carbon is OK it won't take much to get this looking good. Even if the bearings are shot these are readily available. Gil_m will sort you out some decals. You can get some decent XT M739 components and fork stuck on there and you'll be nearly there.Err......Its back up with a BIN of £250
3rd time it's been listed
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0376041244
3rd time it's been listed
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0376041244
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
