GT Bravado Build

J3h

Dirt Disciple
Bare frame
90507_A28_59_D3_4_C5_D_A0_DF_FB9204_B5_F380.png


FSA Headset installed and test fitting some 130mm Rockshox forks
B32_BF02_E_AAFE_41_B1_B3_D7_CF17_A4_F4_C19_F.jpg


Next to find a seat post and clamp, the size is 26.8mm

Then a groupset, probably Deore XT or XTR from the same period.
 
I've got a blue Bravado in my fleet, was mine from when I was in my mid teens and handed to my Mrs, think mine is 96 or 97 with full STX RC groupset, what year is yours? From looks of it be careful running such long forks, they will likely screw up the geometry/handling pretty bad, I'd go no more then 100mm or ideally 60-80mm if you can find some? Mine came with steel rigid forks but recently swapped out to Manitou 3s.
 

Attachments

  • 20180911_171737_resized.jpg
    20180911_171737_resized.jpg
    161.7 KB · Views: 426
Re:

That’s a very nice Bravado in blue, looks like a 98 model with Reynolds 631 oversized tubing from what I can make out, from the serial number on mine it’s a 1997 starts with S7 where I believe “S” is the factory and “7” is 1997.

The steel on this bike gives a really nice high pitched “ting” when you tap it, very similar to my Trek 930 so I think it’s good thin steel but not oversized like yours.

My tequesta is from 1998 and is also oversized tubing with a Reynolds 525 seattube which is a really nice ride with Rockshox Indy S forks, despite being a cheap single sided elastomer they are maintenance free and quite light so I will probably try and source something similiar for this project.

The 130mm forks are from my GT XCR5 which I could never get on with and was plagued with problems so that will be used as a donor bike.
 
So what did I do...

Parts list:

Shimano STX RC bits:
Rear wheel
Brake levers (originally Tequesta)

Deore bits: (from donor GT XCR5)
Front mech 9 speed mega
Trigger shifters 3x9
V-Brakes (Updated)

GT branded parts:
Frame GT Bravado 1997
Riser bars
Front wheels stamped GT
GT Stem

SRAM Parts:
Triple front chainset Truvativ FiReX
Bottom Bracket

SLX:
Rear Mech 9 speed

Front forks:
Surly 1x1 Cromo

Seat post:
BrandX 26.8mm
BrandX 28.6mm clamp



Enjoy!
 
J3h":1h75918b said:
Stealth build Bravado

5_BB15_E76_AEDB_4_D6_B_85_C9_0381310_E5_A12.jpg

Looks lovely and clean! My bad on age of mine, it is indeed 98. If a bike could tell a story.. so I bought the Bravado as a frameset with bent mech hanger off my mate for £15.00 when I was a teen... straightened out the hanger... I then built it as a hack bike in my early 20s, only for it to get stolen out of my garage on the xmas eve, along with rest of my bikes!

I then spotted it out outside of a local McDonalds the new years eve, Police recovered it and handed it back... Now in my late 30s i've rebuilt bit to pretty much original spec/parts from the era and back how it should have been 20 years ago haha!
 

Latest posts

Back
Top