This VW type1 inspired bigwheel is one of the bikes Rody (GROOVY) built for the handbuild bicycle show in Portland this year.
-Handbuild andCustom painted GROOVY bigwheel frame
Specs by Rody
- 24" top tube
- 16" center to center seat tube length for lots of standover clearance
- 18.5" center to top seat tube
- 72.5/73.5 head tube to seat tube angles
- suspension corrected Ho Down fork for 80mm with disc tab and 42mm of rake
- Window cut Paragon drop outs
- External four point rear brake cable brazeons
- 68mm Paragon bottom bracket shell
- Hand bent non-tapering S bend stays
- Custom head badge
- 27.2 mm seat tube with front pinch clamp
- Beautiful PPG acrylic paint with panels and three layers of clear
- Painted to match GROOVY Ho-Down forks
- Painted to match GROOVY LUV Handles
- Thomson seatpost and stem
- KING headset
- Phil wood SS/Disc rearhub, Phil wood Disc fronthub
- White Industries ENO cranks 180mm
- Phil BB
- AVID BB7 mtn disc brakes
- PAUL brake levers
- Brooks Swift Chromo saddle
- Mavic A319 rims
This bike is next to NEW, two allready touched up chips from Travelling to and from the NAHBS show and a little spin (less then 2 miles that is!)around the block by me 'cause it was just too tempting
It's a Singlespeed bike, but it might also be used with a Rohloff SpeedhubD :idea: ) you then have to chance the Paragon slider dropouts and ad some aftermarket cableguides though.
Sizes in cm
Seattube C-T 47,5 cm
Toptube C-C 61cm along tube 62cm horizontaly
-Handbuild andCustom painted GROOVY bigwheel frame
Specs by Rody
- 24" top tube
- 16" center to center seat tube length for lots of standover clearance
- 18.5" center to top seat tube
- 72.5/73.5 head tube to seat tube angles
- suspension corrected Ho Down fork for 80mm with disc tab and 42mm of rake
- Window cut Paragon drop outs
- External four point rear brake cable brazeons
- 68mm Paragon bottom bracket shell
- Hand bent non-tapering S bend stays
- Custom head badge
- 27.2 mm seat tube with front pinch clamp
- Beautiful PPG acrylic paint with panels and three layers of clear
- Painted to match GROOVY Ho-Down forks
- Painted to match GROOVY LUV Handles
- Thomson seatpost and stem
- KING headset
- Phil wood SS/Disc rearhub, Phil wood Disc fronthub
- White Industries ENO cranks 180mm
- Phil BB
- AVID BB7 mtn disc brakes
- PAUL brake levers
- Brooks Swift Chromo saddle
- Mavic A319 rims
This bike is next to NEW, two allready touched up chips from Travelling to and from the NAHBS show and a little spin (less then 2 miles that is!)around the block by me 'cause it was just too tempting
It's a Singlespeed bike, but it might also be used with a Rohloff Speedhub
D :idea: ) you then have to chance the Paragon slider dropouts and ad some aftermarket cableguides though.Sizes in cm
Seattube C-T 47,5 cm
Toptube C-C 61cm along tube 62cm horizontaly
