Danthefestaman
Dirt Disciple
Hi is this bike especially the front wheel worth getting my hands on? Not sure on the year so sorry in advance if it's in the wrong section
Grisley
- Thread starter Danthefestaman
- Start date
Fatal Swan
Senior Retro Guru
- Feedback
- View
I would say yes, depending on the condition of the parts and the price. Some decent stuff there - Spinergy wheel, looks like XT M739 groupset (at least the brakes are and probably crankset, the rest you can't see from the photo), the RockShox fork looks a like it might be an Indy SL which are quite sought after as they're so light, rear skewer is Salsa.
Danthefestaman
Dirt Disciple
What's the front Spinergy and shock worth? I'd like the brakes and a few bits for my bike but not everything.
What is the rear wheel looks odd where the spokes go into the rim?
What is the rear wheel looks odd where the spokes go into the rim?
Magpiegifts
Kona Fan
- Feedback
- View
Rear wheel is a shimano, look good.
A pair of good condition spinergy wheels sell for £300-450. Fork about £50-60.
A pair of good condition spinergy wheels sell for £300-450. Fork about £50-60.
joglo
Senior Retro Guru
Hi, the Frame, Silvertip 30 from End of Nineties, is OK-ish, but the Grisley brand was just one of the brands used from Cycleeurope Group (Peugeot, BH, Gitane and others) after they have hired Peter Grisley (doing nicer bikes for Easton, Reflex, Look and Peugeot before).
Grisley is most know for the "Mega" series, an bike design with very oversized tubes and a bended top tupe - mono stay. To me, simply ugly looking...
Grisley bikes have been most likely produced by BH in Spain.
The rear wheel is from an bit of iconic socalled system wheelsets shimano has launched roughly 2003.
The all look special with a reduced number of spokes, Lx WH-M765 - to me the one used in that bike -, and XT type WH-M765 are pretty strong, but not very lightweight. Xtr variant WH-M965 is light but has a bit of flex.
Grisley is most know for the "Mega" series, an bike design with very oversized tubes and a bended top tupe - mono stay. To me, simply ugly looking...
Grisley bikes have been most likely produced by BH in Spain.
The rear wheel is from an bit of iconic socalled system wheelsets shimano has launched roughly 2003.
The all look special with a reduced number of spokes, Lx WH-M765 - to me the one used in that bike -, and XT type WH-M765 are pretty strong, but not very lightweight. Xtr variant WH-M965 is light but has a bit of flex.
Last edited:
Similar threads
