Splatter Paint
Retrobike Rider
- Feedback
- View
Built from bits from the tip
Circa 1997, blue, alloy frame
Judy T2 forks
DX v-brakes
Axtec brake pads
Shimano 3 x 8 gears
Will chuck in a spare pair or wheels
Snapped off bolt (and drill bit
) in one of the rack mount holes
19.5” c-c / 21” c-t top tube
Scruffy, but just the job for leaving at the station etc. I’ve done about 30 miles on it, no bother. The elastomers were wrecked, so I took an elastomer from another fork and chopped it half. I then drilled a small hole in the top for the adjusters to locate into. They seem to work OK.
£20 collected from Woking
Photos tomorrow in daylight
Circa 1997, blue, alloy frame
Judy T2 forks
DX v-brakes
Axtec brake pads
Shimano 3 x 8 gears
Will chuck in a spare pair or wheels
Snapped off bolt (and drill bit
) in one of the rack mount holes19.5” c-c / 21” c-t top tube
Scruffy, but just the job for leaving at the station etc. I’ve done about 30 miles on it, no bother. The elastomers were wrecked, so I took an elastomer from another fork and chopped it half. I then drilled a small hole in the top for the adjusters to locate into. They seem to work OK.
£20 collected from Woking
Photos tomorrow in daylight
