FS: White Industries cranks, Control Tech, M900 FM + SRP

mynchiboy

Gold Trader
Feedback
View
Been doing a long overdue, lockdown influenced bike split to consolidate the fleet a little. Here's some niceties that have been thrown up for sale as a result. Prices include tracked UK postage :D

White Industries crankset - the proper, US made CNC machined ones as opposed to the forged Sugino jobs. 110/74 bcd and 175mm length. There's a few minor marks and a couple of marks on the back of the drive side, but they look awesome when fitted. £120.00 SOLD for £110.00

XTR M900 front mech, 28.6 clamp and BP. Very good shape with just a touch of corrosion on the screws. Logo section is pretty much unmarked and there's not too much cage wear. I was using this on a single ring setup for a good while so it's had an easier life than most! £35.00 SOLD

Flite Alpes saddle - 1995 stamped. Well used by me and plenty of patina. I've been keeping it in check with the odd bit of boot polish which invariably wears off after a couple of rides, I tried to picture a before and after shot to sort of give you an idea... The rails and chassis are absolutely fine. Use as is or retrim if that's your bag? £18.00 SOLD

Control Tech ahead stem in slightly more unusual red painted finish. 1 1/8" fitment, 120mm length and low rise. A bit of paint missing but mostly invisible when fitted. £16.00

SRP gold bolt selection. Consists of 2x crank bolts, 2x jockey wheel screws, mech breakaway bolt (bit scuffed) and a full set of 5x double chainring bolts, with a couple of spares as backup. Mech bolts fitted a M739 XT mech, they should be fine for similar I'm guessing. £25.00 for the lot

Pictures are below 8)
 

Attachments

  • flite2.webp
    flite2.webp
    72.4 KB · Views: 906
  • flite1.webp
    flite1.webp
    90.2 KB · Views: 906
  • xtr2.webp
    xtr2.webp
    54.4 KB · Views: 905
  • xtr1.webp
    xtr1.webp
    53.7 KB · Views: 906
  • wi4.webp
    wi4.webp
    42.6 KB · Views: 906
  • wi3.webp
    wi3.webp
    38 KB · Views: 906
  • wi2.webp
    wi2.webp
    57.5 KB · Views: 906
  • wi1.webp
    wi1.webp
    52.4 KB · Views: 909
Re:

Pictures continued...
 

Attachments

  • srp3.webp
    srp3.webp
    39.2 KB · Views: 898
  • srp2.webp
    srp2.webp
    45 KB · Views: 898
  • srp1.webp
    srp1.webp
    44.9 KB · Views: 898
  • ct4.webp
    ct4.webp
    55.8 KB · Views: 898
  • ct3.webp
    ct3.webp
    56.7 KB · Views: 898
  • ct2.webp
    ct2.webp
    56 KB · Views: 898
  • ct1.webp
    ct1.webp
    58.7 KB · Views: 898
  • flite3.webp
    flite3.webp
    38.6 KB · Views: 898
PM on its way for the cranks
 

Latest posts

Back
Top