FS: Various hubs! Record OS silver NOS/Mavic/Dura Ace UG/etc

[gattonero]

*** see the last post http://www.retrobike.co.uk/forum/viewto ... 5#p2462335 for updates ***

I had to get rid of lots of wheels, so I've quite a few hubs who need an owner to lace them on new rims!

Starting with the good stuff:
-SOLD- Record 2001 silver, 36 NOS with original skewer (yes, the sought after ones!); £100


-Mavic (501?) silver front hub, 36h, good conditions with new bearings; £15


-SOLD- Dura Ace (7400?) rear hub, 36h, 7 speed Uniglide, 126mm, with original skewer, fair conditions; £20


-Shimano 105 HB&FH5501 front and rear hub, black, 32&32h, with skewers, good/fair conditions; £25


-Shimano 600 Ultegra "tricolour" front and rear hub, 7 speed Hyperglide 126mm, 32&32h, with skewers, good/fair conditions; £30


- PRICE DROP - Nuovo Record rear hub, 36h, freewheel ISO thread (tbc), fair/good conditions, with Campagnolo skewer; £20


-SOLD- Veloce rear hub, 36h, 8 speed cassette body, fair conditions, with Campagnolo skewer; £20


-Deore DX front hub, HB-M650, 32h, silver, good conditions and bearings, with Shimano skewer; £15



All those items can be sent worldwide, please keep in mind I only send via recorded mail, so you're looking to £4-6Uk or £12-16 most of the world.

 

[gattonero]

- SOLD - Campagnolo Chorus freehub 8 speed, NOS, comes with NOS lockring! (worth £15 alone); £15


-SOLD- Campagnolo Eurus/Shamal (or Fulcrum Zero/1) complete rear axle & freehub Campagnolo 9/10/11sp, brand new in bag, the freehub itself retails for £60 +the bare axle is £40 +the adjusting sleeve etcetc; £70 for the whole lot is less than 1/2 price!


-Campagnolo Eurus/Zonda (or fulcrum 1/3) rear freehub Campagnolo 9/10/11sp, a little notchy but with good life left; £25


I also have a set of Shamal fr+re skewers brand new in bag with the spoke tool&magnet; £50 ONO



Plus a big bunch of skewers, all at low price, please ask.

 

[z979]

you have pm

 

[foz]

Plus a big bunch of skewers, all at low price, please ask.

any pics?

 

[gattonero]

Too many my friend, just ask what you need and I'll take a pic.

(the following are skewers only)
-several Campagnolo Veloce level, old type with trad. lever, Fr only
-one Daytona 2004/5 type
-one set of Zonda 2010 level, VGC
-one set of Veloce level, old type with trad. lever
-two sets of Mavic, Ksyrium level, GC
-spare Mavic/Campagnolo mixed (fair conditions)
-one set of Ultegra 6600 and a set of 6700, Fair/GC
-odd Dura Ace 7800 I think, XT 760 I think, both should be rear only Fair/GC

 

[JohnM]

Re:

Pm'd re the Veloce rear hub if you still have it .
:?:

 

[garygkn]

Re: chorus freebub

Hi. If I buy the 8 speed chorus freehu. Can I fit it to any other 8 speed campag hub? Thanks Gary

 

[gattonero]

Re: chorus freebub

Hi. If I buy the 8 speed chorus freehu. Can I fit it to any other 8 speed campag hub? Thanks Gary

Hi

Mainly, yes.
There's two types of 8 or 9sp freehubs for the 12mm steel axle hubs. It is related to the hubs being on cartridge bearings (the axle is straight, the freehub is spaced out with a separate sleeve); or cup/cone (the freehub is spaced by a machining done in the axle itself.
This freehub is actually from a Chorus 1994/5, so it is for cup/cone 8sp rear hubs.

Hope this helps

 

[latman]

does the hidden side of the mavic front hub have a recess cut into it ? the 501 had a black ring inset above the bearing , if not it was the preceeding (otherwise exactly the same) model 500

 

[Yetidh9]

Too many my friend, just ask what you need and I'll take a pic.

(the following are skewers only)
-several Campagnolo Veloce level, old type with trad. lever, Fr only
-one Daytona 2004/5 type
-one set of Zonda 2010 level, VGC
-one set of Veloce level, old type with trad. lever
-two sets of Mavic, Ksyrium level, GC
-spare Mavic/Campagnolo mixed (fair conditions)
-one set of Ultegra 6600 and a set of 6700, Fair/GC
-odd Dura Ace 7800 I think, XT 760 I think, both should be rear only Fair/GC

Any Campa record/Shamal 9speed type front qr?