FS, ritchey, dx, xt, suntour, m900xtr new stuff added

jonnyboy666

Moderator
Retrobike Rider
Gold Trader
Feedback
View
i have tidied up this sale thread and added some new stuff.

please dib here and follow up with a PM, no sneaky offers before replying here please as it's easier to see who wants what first.

all prices include postage, multiple items will get postage discount, all postage is recorded.

paypal is preferred but instant bank transfer is acceptable

shimano 34.9mm m900 xtr front mech, top swing/bottom pull, pretty good condition £20 posted

P1130165 by Dr. Branom, on Flickr


P1130164 by Dr. Branom, on Flickr


P1130163 by Dr. Branom, on Flickr


shimano 34.9 m901 front mech, top swing top pull, pretty good condition £20 posted

P1130162 by Dr. Branom, on Flickr


P1130161 by Dr. Branom, on Flickr


P1130160 by Dr. Branom, on Flickr

shimano stx rear hub, 7speed, 32hole, bearings/free hub feel ok, shell a bit messy, £9

P1120611 by Dr. Branom, on Flickr


suntour xc comp rear hub, never built/used, 7 speed, 36 hole, £10

P1120614 by Dr. Branom, on Flickr


1 pair of deore dx hubs, m650, 32hole, 7 speed, bearings/freehub feel ok, £23

P1120615 by Dr. Branom, on Flickr

P1120616 by Dr. Branom, on Flickr

P1120617 by Dr. Branom, on Flickr


shimano xt front mech, m735, 34.9mm £15

P1120618 by Dr. Branom, on Flickr


2 x pizza cutter cable guides both unused, both black, £10 each

P1120622 by Dr. Branom, on Flickr


cog hog, new in packet £12

P1120685 by Dr. Branom, on Flickr


pink outer basic brake cable, no inner lining, but must be about 10 metres £10

P1120623 by Dr. Branom, on Flickr

shimano dx brake levers, good condition £15

P1120648 by Dr. Branom, on Flickr


P1120649 by Dr. Branom, on Flickr


P1120650 by Dr. Branom, on Flickr


kalloy stem 1 1/8 x 130mm x 0 degree, good condition as i was new when i got it, £10

P1120584 by Dr. Branom, on Flickr


P1120583 by Dr. Branom, on Flickr

another kalloy stem 1 1/4 x 130mm x 5 degree, again in good condition as i bought it new, £10

P1120582 by Dr. Branom, on Flickr


P1120581 by Dr. Branom, on Flickr

girvin flexstem, pretty good condition 1 1/8 x 130mm £15

P1120593 by Dr. Branom, on Flickr


P1120592 by Dr. Branom, on Flickr

tranz x bar ends, adjustable angle feature which i found useful to get them just where you want, couple of marks but not too bad £10

P1120587 by Dr. Branom, on Flickr


P1120586 by Dr. Branom, on Flickr

3 x handlebars all flat so i figured that even though 2 are more modern they'd be better suited in retro mtb for sale

1 x easton ea70, 580mm uncut, logos pretty good except for the central part which would be covered anyway £10posted
1 x raceface silver 570mm uncut, logos still pretty good £10
1 x orange hotrod bar, uncut at 560mm logos a bit worn but still there, £10 SOLD

P1130193 by Dr. Branom, on Flickr



deore dx rear mech, short cage, 7 speed, very good used condition, £25 SOLD
shimano xtr m900 rear mech, blue titanium bolts fitted, good working order, few scratches but nothing really bad, original wheels still have life. £45 SOLD
shimano m900 xtr front canti, no bolts, basic pads, £12 SOLD
magura hs33 brakes in the tomac orange colour, front + rear, just taken them off my proflex, were working fine, both adjusters seem fine, pads have plenty of life, they were routed through the frame for the rear though so may need a quick bleed but i am including the bleed kit and some spares including olives and some fluid. a few scratches but nothing bad, the levers look pretty good, before anyone mentions it, you'll notice the QR is upside down on one brake, that's because it's the easiest way to fit them to a proflex on the back! yours for £70 SOLD
kona impact headset, used but working order, i think all the ball bearings are there, the side on pic shows the worst marks on the lower cup, £15 SOLD
shimano m900 xtr canti brakes front and rear specific, full set including bolts and washers, non original pads, aztec in the front and bbb in the rear £40 SOLD
shimano m900 xtr cranks, 175mm 28/36/48 rings, i polished these up, they are pretty much mirror finish but these are from my early attempts at polishing so they were marked first during the initial prepping, hopefully it shows up in the pics, have fitted the rings that came with them (i used middleburn on these) so they are miss-matched, top is i think shimano 48t, middle is unknown 36t and bottom is tioga steel 28t, the threads and tapers are fine and i think they look pretty good. £45 SOLD WITHOUT RINGS FOR £35
shimano lx front mech m563, 31.8mm top pull, £6 SOLD
orange hotrod bar, mid 90's? 25.4mm x 600mm, uncut, logos reasonable £12 SOLD
deore dx full brake set, running xt pads in good condition, bolts are miss-matched black and silver though, plastic backings are good and not ripped up etc, £20 SOLD!
deore dx front mech, 28.6mm conventional, bottom pull, £12 SOLD!
orange bikes windchime, £20 SOLD chime, £20 SOLD
deore dx thumbshifters, 7 speed, will include the cables pictured and chuck in a new one aswel £35 SOLD
shimano dx chainset 175mm, 28/36/48, rings are slightly miss-matched, top is shimano biopace, middle is stronglight round and inner is biopace, all parts were NOS when i got them and the haven't been used that much so the condition is still good, logos etc intact and threads/tapers are spot on. £40 SOLD
pace rc31 forks pretty good condition, 1" x 168mm, 445 a-c, disc only £100 SOLD
shimano dx chainset 175mm, 28/36/48, rings are slightly miss-matched, top is shimano biopace, middle is stronglight round and inner is biopace, all parts were NOS when i got them and the haven't been used that much so the condition is still good, logos etc intact and threads/tapers are spot on. £40 SOLD
ritchey stem, the rare 1" ahead version 120mm x 25.4, slight rise , average condition £10 SOLD
 
Re: FS, pace, deore dx, suntour, cog hog, m900 xtr plus more

thought i'd bump this thread as i have added a load of stuff to it, please buy it! i have a Yo to build!! :D
 
Re: FS, pace, deore dx, suntour, cog hog, m900 xtr plus more

Hi, is the kona headset a 1 1/8. Cheers?
 
Re: FS, pace, deore dx, suntour, cog hog, m900 xtr plus more

Could you pm me some better photos of the xt break pads on the cantilevers please ?
 
Re: FS, pace, deore dx, suntour, cog hog, m900 xtr plus more

are the ones in the pics not good enough? i'm just off out so haven't got time right now, they have plenty of wear left in them, not mishapen at all, loads of life in them.
 
Re: FS, pace, deore dx, suntour, cog hog, m900 xtr plus more

Can you send me a pic of the damage on the nuke proof pls mate...I can't really see where you mean.... Oh and dibs pending :D

Ant
 
Re: FS, pace, deore dx, suntour, cog hog, m900 xtr plus more

hey ant, if you compare the two pics of the end caps you'll notice what i mean, one end has a sort of serrated end, the other has worn off abit, i don't think it would be an issue but i have never built it up into a wheel, just never got round to it, it wouldn't bother me but i like to be honest in my descriptions
 
Re: FS, pace, deore dx, suntour, cog hog, m900 xtr plus more

Thnx Jon got it :oops: can I have dibs until first thing in the morning...need to have rummage to see if I have a spare/replacement.

:cool:
 
Back
Top