- Feedback
- View
Edit! more stuff added! 
so i have a bit of stuff for sale, will add to this post later when i have taken a few more pics of stuff but first here are some wheels i have for sale:-
Hope Evo 2 hubs on mavic rims, stainless steel spokes with brass nipples.
the hubs spin fine and the have been taken care of over the last couple of years and currently have a steel freehub body so you can fit any cassette you like, although i have been running a 10 speed i'm not sure if these will take an 11, so i'll check tomorrow, the bearings are fine and the rims spin nice and straight.
they are currently set up for 15mm bolt through front and 142 x 12 rear but i think i have some different ends if you want standard QR front and rear as these hubs can be made to fit several options.
the tyres are Maxis High roller2 2.3" up front and a Ardent 2.25" on the rear, both have plenty of wear left and are currently running tubes although they are tubeless compatible, i just never got around to doing it.
i want £200posted for these, no offers as i think it's a good price with the tyres etc.
pics
IMG_8007 by Dr. Branom, on Flickr
IMG_8014 by Dr. Branom, on Flickr
IMG_8015 by Dr. Branom, on Flickr
IMG_8008 by Dr. Branom, on Flickr
IMG_8016 by Dr. Branom, on Flickr
IMG_8009 by Dr. Branom, on Flickr
IMG_8010 by Dr. Branom, on Flickr
IMG_8017 by Dr. Branom, on Flickr
shimano SLX 10 speed rear mech, pretty good condition, was on my fat bike but i've upgraded to 11speed on that, has XT jockey wheels £30 SOLD ON EBAY
IMG_8419 by Dr. Branom, on Flickr
IMG_8420 by Dr. Branom, on Flickr
shimano XT 10 speed rear mech with Hope Jockey wheels, this was on my Orange 5 but have upgraded to 11 speed, few wear marks but functions fine £45
IMG_8421 by Dr. Branom, on Flickr
IMG_8422 by Dr. Branom, on Flickr
as you can see the ano has worn a bit form use but the teeth aren't worn yet
IMG_8424 by Dr. Branom, on Flickr
10 speed deore shifter £12 SOLD ON EBAY
IMG_8425 by Dr. Branom, on Flickr
Easton EA70 stem 100mm x 6 degree x 31.8mm, £10
IMG_8436 by Dr. Branom, on Flickr
IMG_8437 by Dr. Branom, on Flickr
IMG_8438 by Dr. Branom, on Flickr
IMG_8439 by Dr. Branom, on Flickr
Xlite riser bar, uncut at 630mm £10
IMG_8440 by Dr. Branom, on Flickr
IMG_8441 by Dr. Branom, on Flickr
IMG_8442 by Dr. Branom, on Flickr
FSA carbon flat bar, 600mm, 25.4mm slight sweep there is some slight damage to one end but i had in a bike for quite a while like this with no issues, damage is pictured £15
IMG_8446 by Dr. Branom, on Flickr
IMG_8447 by Dr. Branom, on Flickr
the damage:-
IMG_8448 by Dr. Branom, on Flickr
Specialized silver flat bar uncut at 600mm wide, 25.4 £10
IMG_8449 by Dr. Branom, on Flickr
IMG_8450 by Dr. Branom, on Flickr
IMG_8451 by Dr. Branom, on Flickr
IMG_8452 by Dr. Branom, on Flickr
RaceFace flat bar uncut at 575? odd measurement! £10
IMG_8453 by Dr. Branom, on Flickr
IMG_8454 by Dr. Branom, on Flickr
IMG_8455 by Dr. Branom, on Flickr
Thomson stem, new stainless bolts fitted, 10 degree x 90mm x31.8mm, £30 SOLD
so i have a bit of stuff for sale, will add to this post later when i have taken a few more pics of stuff but first here are some wheels i have for sale:-
Hope Evo 2 hubs on mavic rims, stainless steel spokes with brass nipples.
the hubs spin fine and the have been taken care of over the last couple of years and currently have a steel freehub body so you can fit any cassette you like, although i have been running a 10 speed i'm not sure if these will take an 11, so i'll check tomorrow, the bearings are fine and the rims spin nice and straight.
they are currently set up for 15mm bolt through front and 142 x 12 rear but i think i have some different ends if you want standard QR front and rear as these hubs can be made to fit several options.
the tyres are Maxis High roller2 2.3" up front and a Ardent 2.25" on the rear, both have plenty of wear left and are currently running tubes although they are tubeless compatible, i just never got around to doing it.
i want £200posted for these, no offers as i think it's a good price with the tyres etc.
pics
IMG_8007 by Dr. Branom, on FlickrIMG_8014 by Dr. Branom, on FlickrIMG_8015 by Dr. Branom, on FlickrIMG_8008 by Dr. Branom, on FlickrIMG_8016 by Dr. Branom, on FlickrIMG_8009 by Dr. Branom, on FlickrIMG_8010 by Dr. Branom, on FlickrIMG_8017 by Dr. Branom, on Flickrshimano SLX 10 speed rear mech, pretty good condition, was on my fat bike but i've upgraded to 11speed on that, has XT jockey wheels £30 SOLD ON EBAY
IMG_8419 by Dr. Branom, on FlickrIMG_8420 by Dr. Branom, on Flickrshimano XT 10 speed rear mech with Hope Jockey wheels, this was on my Orange 5 but have upgraded to 11 speed, few wear marks but functions fine £45
IMG_8421 by Dr. Branom, on FlickrIMG_8422 by Dr. Branom, on Flickras you can see the ano has worn a bit form use but the teeth aren't worn yet
IMG_8424 by Dr. Branom, on Flickr10 speed deore shifter £12 SOLD ON EBAY
IMG_8425 by Dr. Branom, on FlickrEaston EA70 stem 100mm x 6 degree x 31.8mm, £10
IMG_8436 by Dr. Branom, on FlickrIMG_8437 by Dr. Branom, on FlickrIMG_8438 by Dr. Branom, on FlickrIMG_8439 by Dr. Branom, on FlickrXlite riser bar, uncut at 630mm £10
IMG_8440 by Dr. Branom, on FlickrIMG_8441 by Dr. Branom, on FlickrIMG_8442 by Dr. Branom, on FlickrFSA carbon flat bar, 600mm, 25.4mm slight sweep there is some slight damage to one end but i had in a bike for quite a while like this with no issues, damage is pictured £15
IMG_8446 by Dr. Branom, on FlickrIMG_8447 by Dr. Branom, on Flickrthe damage:-
IMG_8448 by Dr. Branom, on FlickrSpecialized silver flat bar uncut at 600mm wide, 25.4 £10
IMG_8449 by Dr. Branom, on FlickrIMG_8450 by Dr. Branom, on FlickrIMG_8451 by Dr. Branom, on FlickrIMG_8452 by Dr. Branom, on FlickrRaceFace flat bar uncut at 575? odd measurement! £10
IMG_8453 by Dr. Branom, on FlickrIMG_8454 by Dr. Branom, on FlickrIMG_8455 by Dr. Branom, on FlickrThomson stem, new stainless bolts fitted, 10 degree x 90mm x31.8mm, £30 SOLD
