FS: Campagnolo GS , NR , Record components

Rippers

Dirt Disciple
Collection of vintage Campagnolo Gran Sport , Nuevo Record and Record bits plus Selle San Marco G.S. seat post . All in excellent condition,except the Record calipers which I rate as good. There is all also a Very mint Nuevo Record bottom bracket Italian threaded thick cups not shown but included.
GS front brake calliper is NOS
Selle San Marco seatpost is probably 1980s , 27.2 mm
Campagnolo seatpost is short version, 27 mm

£275 posted U.K. only.

£250 collected from London.



More pics available on request
 

Attachments

  • F15A4818-A55E-48EB-BEEC-84FA8FAD244F.webp
    F15A4818-A55E-48EB-BEEC-84FA8FAD244F.webp
    101.7 KB · Views: 901
Re:

Hi!

Is the clip on the front mech black? As in Super Record? Cant tell from the photos. Also what size is the stem and is it a Cinelli Milano oval logo?

Many thanks!
 
Stem is standard Cinelli A1 ,that’s why it’s not listed. The clip on the front mech is silver flat type with 4 hole cage they are quite rare and normally fetch a premium.
 

Attachments

  • 04FF4F7C-80ED-47A8-9FB4-B8E4FDB73EA5.webp
    04FF4F7C-80ED-47A8-9FB4-B8E4FDB73EA5.webp
    50 KB · Views: 767
  • F1DDE635-069F-4165-BDFB-3FE8461C3898.webp
    F1DDE635-069F-4165-BDFB-3FE8461C3898.webp
    45.3 KB · Views: 767
Re:

@damon123: Pending clarification, I'd guesstimate that stem to be 8cm... maybe 9cm.

@Rippers: You might want to specify whether the brake calipers are standard drop (47-57mm) or piccolo (42-52mm), and whether the pivot bolts are nutted or allen key fitted? GLWS.
 
Re:

stem is not listed in the FS post so length is not relevant.

I will measure brake calliper drop and post a soon as I can

Regards
 
Brake Caliper drop has been measured from centre of brake bolt to centre of brake pad at its lowist point on the brake arm :

GS front 53MM drop . Max mounting bolt length is 28mm

Record front drop as above Mounting bolt as above

Record rear drop as above Mounting bolt has been cut to 10 mm so only suitable for hollow Allen key bolt fitting
 
Re:

Thanks for the update! Not what I was after unfortunately but appreciate you taking the time to get back to me! GLWS!
 

Latest posts

Back
Top