Moots Smoothie, Full 3/2.5 Titanium. This is one of the later Smoothies, so it has the asymmetrical chainstay bridge. New headbadge, newish decals (I have the remainder of the decal set, I'll ship with the bike or apply, buyer's choice).
I switched out the stock Fox Float AVA with a Fox RP23 with Propedal. Medium compression dampening, as recommended by Moots. New DU eyelet bushings. I've done one air sleeve maintenance cycle on the shock, with a leak test afterwards (no oil/air leaks). Rear end is tight, no bearing play. Replaceable RD hanger. DKG 34.9 Seat clamp included.
This is a 19" Smoothie, as loosely defined by Moots.
19.25 Seat Tube C-T
23.00 Top Tube C-C
23.50 Top Tube Effective (Approx)
4 15/16" Heat Tube
English BB, 1 1/8" HT, 34.9 FD, 73mm BB width
Disc Only, 51mm IS Tabs
Titanium is in excellent condition, no dents, dings, or gouges. Some cable rub, skin deep only. 3M Tape applied in the usual rub spots. No chain suck, some chain rub, looks worse in the Photobucket shots. A couple of rub marks on the non-driveside aluminum rocker. Some minor scratches on one RD cable guide. In short, I'd say a trip to Steamboat for a refurb could bring this frame back to showroom status. All threads and press fit surfaces are clean.
$1400 plus shipping (in US, 48047)
I'm at: cjn1014@att.net
More photos at:
http://s221.photobucket.com/albums/dd230/cjn1014/Moots%20Smoothie/
I switched out the stock Fox Float AVA with a Fox RP23 with Propedal. Medium compression dampening, as recommended by Moots. New DU eyelet bushings. I've done one air sleeve maintenance cycle on the shock, with a leak test afterwards (no oil/air leaks). Rear end is tight, no bearing play. Replaceable RD hanger. DKG 34.9 Seat clamp included.
This is a 19" Smoothie, as loosely defined by Moots.
19.25 Seat Tube C-T
23.00 Top Tube C-C
23.50 Top Tube Effective (Approx)
4 15/16" Heat Tube
English BB, 1 1/8" HT, 34.9 FD, 73mm BB width
Disc Only, 51mm IS Tabs
Titanium is in excellent condition, no dents, dings, or gouges. Some cable rub, skin deep only. 3M Tape applied in the usual rub spots. No chain suck, some chain rub, looks worse in the Photobucket shots. A couple of rub marks on the non-driveside aluminum rocker. Some minor scratches on one RD cable guide. In short, I'd say a trip to Steamboat for a refurb could bring this frame back to showroom status. All threads and press fit surfaces are clean.
$1400 plus shipping (in US, 48047)
I'm at: cjn1014@att.net
More photos at:
http://s221.photobucket.com/albums/dd230/cjn1014/Moots%20Smoothie/
