Front mech hanger/seatpost binder bolt for Giant CDEX 980C

[paul8valve]

anyone got a front mech hanger (held on frame with two screws to allow fitment of braze on mech) and/or a seatpost binder bolt for an early CADEX frame?

thanks in advance.
Paul

 

[walkmanman]

I think I have one of these somewhere, since I remember the unusual design. It was a long time ago when I removed it from a frame, so is quite possibly lost now but I can look

 

[paul8valve]

Thank you!

 

[walkmanman]

I've found the hanger- however, it quite possibly won't do any good. This is because I recalled seeing several of these unusual hangers on Giant bikes, and decided to look up a few online and discovered that the carbon (Cadex) models seem to have slightly differently shaped hangers compared to the alu models. It might be enough of a difference to mean that hangers can't be swapped between the two types of frame.
Anyhow, have a look at the pics below and I'm sure you'll know straight away if your old one matches:

 

[cce]

Re:

I've an alu TCR from a similar timeframe if you want a picture of the hanger for comparison