Foz ex Battered Bitsa Batavus Professional 1984-ish

legrandefromage

Bin Monkey
BoTM Winner
PoTM Winner
GT Fan
Feedback
View
I sold a record player

I had money

I bought a frame

Heres Foz' ex battered Batavus Professional. He says Reynolds, I think Columbus. Either way, it is a very light frame and fork combination.

He was very kind to include a Shimano 600 headset. One of my bits of 600 headset was in better condition than his bit of 600 headset so out of this came a very nice 600 headset.

Other parts were from the bitsa parts bin but its Ultegra or 600 apart from the wheels.

Brakes are a set of unused Dia-Compe.

Its a bitsa because its all the parts that were badly listed or forgotten on ebay so hardly any real money was spent and despite this race to the bottom its turned out to be a very nice capable bicycle.

The downtube braze ons are for Shimano shifters and nothing else so a bit of thinking and some donated bolts from a spare set of Shimano brake levers soon had that sorted.

The saddle used to be a Raleigh but the suede was peeling and underneath the knackered sponge was a whole different saddle- a Selle Royal GT.

So there you go, built to a budget every expense spared, very little period correct if anything.

The ride? Amazing! Very fast, very nice, needs a nice sunny day to take it out.
 

Attachments

  • batavus1.webp
    batavus1.webp
    203.3 KB · Views: 1,152
  • batavus2.webp
    batavus2.webp
    66.4 KB · Views: 1,022
  • batavus3.webp
    batavus3.webp
    133.3 KB · Views: 1,002
  • batavus4.webp
    batavus4.webp
    146.4 KB · Views: 1,004
  • batavus5.webp
    batavus5.webp
    127.5 KB · Views: 1,027
well that turned out ok then! I had it for a few years and never got it finished, you've had it for a few days and you've finished it and ridden it firther than I ever did, which was nowhere :facepalm:
 
are those 4.5mm bolts then? Who'd have thought shimano would be using those only a few years ago... i was going to retap to 5mm and be done with it. needed backing plates for the DT shifters though, started making some but then ran out of time, patience, and the will to finish them.

and what model chanset is that exactly? I like the look of it with those black rings
 
Those braze-ons were for the straight fit of Shimano shifters without the need of any backing plates, as I'm sure you already knew.

But for those that dont, the plates from the band on versions of later shifters fit straight on, if you look at the pics, you will see why.

The back of the band on version is the same as the braze-on, they bolt straight on - with the right bolt of course!
 

Attachments

  • shifter mounts.webp
    shifter mounts.webp
    78.1 KB · Views: 860
  • band on mount.webp
    band on mount.webp
    35.1 KB · Views: 860
  • shimano braze on.webp
    shimano braze on.webp
    134.9 KB · Views: 860
And the originals for what is a Shimano 'B' type mount

These are from the 'golden arrow' shifters - I can honestly say I did not know of their existence until this morning!
 

Attachments

  • golden arrow mount.webp
    golden arrow mount.webp
    62.7 KB · Views: 858
Like the shifter info...
 
Back
Top