Wanted Fox 36 26er FIT RLC crown or fork? Some help please

[Yaldie]

Looking for a fox 36 replacement crown, possibly fork which I can harvest parts from. Stanchions are very worn, wondered if anyone had some bits kicking around.

Not familiar with fox years or models so need some help identifying the correct part please.

A couple of pictures of the forks I have inherited.

 

[scant]

https://www.retrobike.co.uk/threads...it-rlc-fork-160mm-26inch.480265/#post-3596092

 

[ishaw]

Found a couple of options I recalled seeing. Not sure if they are suitable for your fork though.

I would say if yours are worn like that, the bushings may be toast or at minimum, have a lot of crud inside causing the west.

https://m.pinkbike.com/buysell/3767078/
https://m.pinkbike.com/buysell/3428258/

 

[Yaldie]

Found a couple of options I recalled seeing. Not sure if they are suitable for your fork though.

I would say if yours are worn like that, the bushings may be toast or at minimum, have a lot of crud inside causing the west.

https://m.pinkbike.com/buysell/3767078/
https://m.pinkbike.com/buysell/3428258/

Thanks, possibly an issue just trying to save them rather than replace

 

[ishaw]

The wear on your uppers means the uppers really need replacing. The bushings may also be shot. You won't know until you take them apart and inspect.