(FOUND)Odyssey Svelte 3DV seat binder bolt

Qebrus

Dirt Disciple
Looking for one of the Odyssey allen key binder bolts or for that matter any brazed on mtb binder bolt for my 95' rockhopper to replace the ugly quick release.
 
Re: Odyssey Svelte 3DV seat binder bolt

Bump, will consider other similar types of non quick release binder bolts!
 
Re: Odyssey Svelte 3DV seat binder bolt

Hi, will this work for you?
 

Attachments

  • IMG_20201207_233727.jpg
    IMG_20201207_233727.jpg
    94.3 KB · Views: 250
Re: Odyssey Svelte 3DV seat binder bolt

Yes that looks perfect, assuming it’s a hex on each end? If at all possible would you be able to measure the length and I’ll check the clamp on my frame to see if it will fit, I had forgotten to mention the length in my original post.
 
Re: Odyssey Svelte 3DV seat binder bolt

Only one side is hex head. The black thingy at the other end is a nut. Length without considering the hex head is 50mm.
 
Re: Odyssey Svelte 3DV seat binder bolt

Atmos":3ig3ojsx said:
Only one side is hex head. The black thingy at the other end is a nut. Length without considering the hex head is 50mm.

Perfect! assuming the hut can tighten down as far as possible then there should be actually no need for me to do any measurements, how much would you be looking for?
 
Re: Odyssey Svelte 3DV seat binder bolt

Atmos":3d6d15xt said:
Only one side is hex head. The black thingy at the other end is a nut. Length without considering the hex head is 50mm.

Just received your pm, unfortunately I cannot respond to pm’s, I might have to turn down your offer at the minute as it doesn’t seem reasonable to order this from the US with the potential handing and import charges.

Thanks anyway!
 
Re:

The other part in the picture is the special tool to fit the bolt to stop anyone with an Allen key making off with your seat also doubles as a tyre lever, if you want it will do it for a tenner posted ;)
 
Back
Top