for sale! stems, ali O,more added!!! mag20,brakes,hubs,bars

jonnyboy666

Moderator
Retrobike Rider
Gold Trader
Feedback
View
i decided to sell some stuff, the elite has been depurpled, if that's a word! also some other bits i don't need.

i have just got some time off so i should be pretty quick on getting stuff out, payments by paypal gift please, i need the money to pay for a couple of projects on the go so if the stuff isn't gone reasonably quickly i will be ebaying some of it. but if that happens i will post the ebay links in ebay watch.

please "dib" here and follow up with a PM, dibs last for a while but if i hear nothing after a day or so then you lose you dib rights!!

ALL PRICES ARE POSTED i am happy to post abroad but it's extra, and outside of the UK i always use recorded, and this can cost quite alot more so bear that in mind, i don't find it extra hassle it's just more expensive for you!!

here's the list! :D

➡️ maxxis crossmark folding tyre, 26 x 2.1 £10 SOLD!

➡️ 1 pair of onza grips £4 SOLD

➡️ 1 xt left hand shifter, M740 it works perfectly but the bottom cover has broken off, it was like that when i got it off ebay a while ago, but it works fine. £10

➡️ 1 xtr left hand shifter, M950 £14 SOLD!

➡️ 1 pair of the re issue ONZA folding porc tyres literally brand new, £18 SOLD!

➡️ 1 pair of the re issue ONZA folding tyres, this pair have been fitted and ridden but maybr only done a 100 or so miles offroad, the dustier pair in the pics. £15

➡️ controltech 1 1/8 quill stem, £15 SOLD

➡️ Answer ATAC 1 1/4 purple stem, £30 SOLD!!

➡️ Syncros 1 1/8 quill stem in polished silver with a hinged black clamp, about 10 degree rise and approx 125/130 length depending how it's measured (no obvious point to measure from!) pretty spotless appart from where the headset locknut has left a mark on the quill. logos are also intact on both sides £30

➡️ USE purple post, £35 SOLD!

➡️ Controltech purple handlebar, £25 SOLD!

➡️ purple ONZA bar ends, awesome condition, L bend style, logos intact. bought from here only month or so ago, same price, £25

➡️ original orange bar ends in polished silver, bit scuffed but not too bad, logo's are better on one than the other £7



here is a link to all the pics, hopefully it will work!

http://s929.photobucket.com/albums/ad13 ... oy6666666/


feel free to ask questions, should be online till midnightish but will be scanning ebay aswel so will try to get back to you asap. :D

-------------------------

more for sale as well as the above stuff, should also be the same linky thing

➡️ shimano deore dx mt60 chainset, 175mm, 26/34/46 the rings are black, the cranks are polished, pretty good condition, rings have good life in them, the middle is an RPM but the other 2 are shimano. threads are good. £40

➡️ shimano, deore dx mt60 chainset, 175mm, 24/36/46, the rings are silver, the middle i think is a stronglight and the other 2 are shimano, these cranks i think are nicer than the others, rings have good life, comes with the shimano plastic crank caps which are ok-ish condition, threads are good, £50

➡️ shimano deore dx mt60 cranks arms, 170mm no rings, pretty good condition, threads are good, £20

➡️ basic black stem with red/white logo. 100mm, some rise, std bar fit, £5 SOLD

➡️ easton ea70 120mm, standard bar fit, some marks but not bad £10

➡️ FSA xc170, stem, 110mm x 6 degrees, 25.4 bar fit, good condition £8

➡️ syncros polished stem, pretty good condition, 1 1/8 x 110mm no rise, 1 letter missing on one side, includes the rare alloy top cap assembly, £20 DIBBED

➡️ shimano deore m510 front hub, 32hole, black, could do with a rebuild but once greased will feel fine. £5

➡️ shimano deore dx front hub, 32hole, feels pretty smooth, never used by me but seems fine, £9

➡️ shimano deore xt i think front hub, the fittings and the outside caps look just like xt but the logo has worn off so i can't be sure, 32hole, could use a regrease but feels ok, £7 due to lack of logo's

➡️ shimano alivio hubs, 32hole, rear is a silent clutch job, the freehub is nice and smooth but both bearings could use a regrease, the pics made the rear shell look pitted but it's not really, £11

➡️ shimano saint bash guard thing 4bolt 104pcd, £8

➡️ ritchey OE pedals, £8 SOLD

➡️ girvin flexstem, 1 1/4 quill x 120mm flouro yellow, pretty good condition £15

➡️ shimano 36t 110pcd chainring £5 SOLD

➡️ rockshox mag20 forks, 1" ahead, 213mm steerer length. these were resprayed by bob jackson a year or so ago, the gold colour is not quite right, it's more champagne colour and there is some corrosion on the legs now but not really bad, i painted the brace though. the crown was NOS and it is replaceable (bolted) the forks do work as they had new seals fitted by TF tuned after i got them back from Bob, they come with a proper rockshox pump, as these are old though i would say they are more for show as opposed to a regular rider fork, don't get me wrong i have ridden them, including a couple of IOW rides with no issues but i'm just a paranoia freak with older mags. also one of the fork brace bolts must have rounded the thread at somepoint as it has been re-tapped to a bigger thread. £50

➡️ shimano alivio F+R canti's with pads, no bolts though, £8 the lot

➡️ 1 x m501 and 1 xm734 canti brakes, no bolts, no pads, these have been repaired due to the threads dying (not by me!) basically there is a bolt going right through the arm with the cable clamp, not the best repair on both but they work ok once set up £5

➡️ 1 x m650 canti brakes, (just one ends worth) no bolts or pads but these ones are fine, meaning they're not a repair job! £4

➡️ full set of F+R shimano m734 canti's £12 SOLD

➡️ kona racelight handle bar, 560mm uncut, needs central shim to make it 25.4 width though (shims are on ebay for about £4) logo is half worn, £5

➡️ GT handlebar, 540mm, uncut, silver alloy bar, £5

➡️ X-lite titanium bar, 550mm, i think uncut but i haven't pulled the plugs out to check! plugs are blue, logo's have faded away though, these are the straight straights though meaning no bend at all, £20

➡️ xtr m900 canti brake, spares i suppose, this was part of a miss matched set from evilbay, no pads, no mounting bolts, basically one arm is a front and one arm is a rear, but they would work ok but they don't match as such. £10

➡️ m900 xtr 1 1/4 headset. £30 SOLD!!

that's it for now but again there is more but i haven't got the pics sorted on all of it yet!! :D
 
Re: various bits for sale! wheels, purple, stems, etc

jonnyboy666":1kp7ionx said:
➡️ 1 xtr left hand shifter, M950 few marks and frankly the pictures make them look alot worse than they are, £14

➡️ 1 pair of the re issue ONZA folding porc tyres, these were fitted but unused so they are literally brand new, £18
hi there,
I'd be happy to take the xtr-shifter, M950, and - if you are willing to post to denmark - the new onzas.
I also PM you.

regards,
lars
 
was gonna ebay it but i just saw how much it cost me to list the LEMON!! :shock:

so here for sale is my 1992 i think Orange aluminium O.

size 19"centre to top

it was repainted by bob jackson 2 years ago, the stickers are their painted style and unlike the one i got off ebay a while ago i did get them spell it right!!. basically i copied the original style paint but instead of matt finish silver grey i had it done in white. the seatpost size is 27.2mm the headset size is 1 1/4 as is the matching genuine orange fork. the paint is pretty spotless, the odd mark here and there but any marks are in places that don't matter, front mech clamp, drop outs etc!

the was some original chain suck on the frame which has been painted over so barely noticeable, also the headtube has a small wear mark in it where a brake cable has rubbed against it before i got it but again this has been painted over. this sale is for the frame and fork, does not include the bottom bracket in the frame, i just haven't removed it yet!

price is £150 posted, for an extra £15 i will include an m900 xtr headset aswel, which is mint! fitted and used in my elite but removed just recently and is near perfect.

here's some pics :D
 

Attachments

  • aluminium O bob logo.jpg
    aluminium O bob logo.jpg
    27.4 KB · Views: 2,203
  • aluminium O fork.jpg
    aluminium O fork.jpg
    38.6 KB · Views: 2,203
  • aluminium O frameset.jpg
    aluminium O frameset.jpg
    43.8 KB · Views: 2,203
  • aluminium O headtube.jpg
    aluminium O headtube.jpg
    32.3 KB · Views: 2,203
more pics :D

and just incase you wondering, my "jonnyboy666" logo comes off easily and i'll do that before it sells! :LOL:
 

Attachments

  • aluminium O bb assembly.jpg
    aluminium O bb assembly.jpg
    35.3 KB · Views: 2,195
  • aluminium O downtube logo.jpg
    aluminium O downtube logo.jpg
    30.9 KB · Views: 2,195
  • aluminium O side view.jpg
    aluminium O side view.jpg
    56.6 KB · Views: 2,195
Back
Top