CezarB
Old School Hero
Need a clean and polish... I ran out of time but all functional. Photos speak for them selves. Paypal gift, POSTAGE NOW INCLUDED IN PRICES BELOW.
Deore DX, bottom pull, 31.8mm -----£10
for sale front mechs by Cezar B, on Flickr
for sale front mechs by Cezar B, on Flickr
Campagnolo Xenon, bottom pull, 34mm??? ------- £10
for sale front mechs by Cezar B, on Flickr
for sale front mechs by Cezar B, on Flickr
Deore DX, bottom pull, 31.8mm ----------£10
for sale front mechs by Cezar B, on Flickr
for sale front mechs by Cezar B, on Flickr
Deore LX, bottom pull, 28.6 mm -------£9
for sale front mechs by Cezar B, on Flickr
for sale front mechs by Cezar B, on Flickr
Deore, bottom pull, 28.6mm -------£10
for sale front mechs by Cezar B, on Flickr
for sale front mechs by Cezar B, on Flickr
Deore XT band on, 1 3/8, bottom pull. Original bolt snapped, I replaced with with another which stick out a little but holds tight -------£8
for sale front mechs by Cezar B, on Flickr
for sale front mechs by Cezar B, on Flickr
for sale front mechs by Cezar B, on Flickr
Deore BL-MT63 levers, selling as I don't use cantis. £15 posted
levers1 by Cezar B, on Flickr
levers1 by Cezar B, on Flickr
Deore LX 28.6mm front mech, bottom pull. £9
deore lx by Cezar B, on Flickr
deore lx by Cezar B, on Flickr
Salsa stem? 150mm 0-degree, 1inch. With a nice internal cable guide. Not sure why there's green in the bar clamp? I will take more photos in request. £15
clearout by Cezar B, on Flickr
clearout by Cezar B, on Flickr
Newton Stem - CNC'd out of AlCuMg2 alloy with titanium screws(one has been replaced with alloy) 110mm, 0-degrees, A-head, £15
clearout by Cezar B, on Flickr
clearout by Cezar B, on Flickr
1. Ritchey Forcelite bar, uncut (570mm), needs a clean and has a slight clamping mark on the right hand side. £16
2. Unknown titanium bar with shim, uncut (550mm) with a very tiny clamp mark on the right hand side. £30 Or £40 with the newton stem.
clearout by Cezar B, on Flickr
clearout by Cezar B, on Flickr
clearout by Cezar B, on Flickr
1. Biopace 28t £6
2. Biopace 38t £6
3. Biopace 48t £6 (or £15 as a set of 3 above, posted)
4. 7075 alloy CNC 34t £6
5. Biopace HP 46t £6
clearout by Cezar B, on Flickr
1. SG C-48t £6
2. SG-X F-46t £6
3. Biopace 28t £6
4. SG C-24t £6
5. SG F-26t £6
clearout by Cezar B, on Flickr
Aztec nos pads, £6
clearout by Cezar B, on Flickr
Jagwire new pads, £6
clearout by Cezar B, on Flickr
Deore DX, bottom pull, 31.8mm -----£10
for sale front mechs by Cezar B, on Flickrfor sale front mechs by Cezar B, on FlickrCampagnolo Xenon, bottom pull, 34mm??? ------- £10
for sale front mechs by Cezar B, on Flickrfor sale front mechs by Cezar B, on FlickrDeore DX, bottom pull, 31.8mm ----------£10
for sale front mechs by Cezar B, on Flickrfor sale front mechs by Cezar B, on FlickrDeore LX, bottom pull, 28.6 mm -------£9
for sale front mechs by Cezar B, on Flickrfor sale front mechs by Cezar B, on FlickrDeore, bottom pull, 28.6mm -------£10
for sale front mechs by Cezar B, on Flickrfor sale front mechs by Cezar B, on FlickrDeore XT band on, 1 3/8, bottom pull. Original bolt snapped, I replaced with with another which stick out a little but holds tight -------£8
for sale front mechs by Cezar B, on Flickrfor sale front mechs by Cezar B, on Flickrfor sale front mechs by Cezar B, on FlickrDeore BL-MT63 levers, selling as I don't use cantis. £15 posted
levers1 by Cezar B, on Flickrlevers1 by Cezar B, on FlickrDeore LX 28.6mm front mech, bottom pull. £9
deore lx by Cezar B, on Flickrdeore lx by Cezar B, on FlickrSalsa stem? 150mm 0-degree, 1inch. With a nice internal cable guide. Not sure why there's green in the bar clamp? I will take more photos in request. £15
clearout by Cezar B, on Flickrclearout by Cezar B, on FlickrNewton Stem - CNC'd out of AlCuMg2 alloy with titanium screws(one has been replaced with alloy) 110mm, 0-degrees, A-head, £15
clearout by Cezar B, on Flickrclearout by Cezar B, on Flickr1. Ritchey Forcelite bar, uncut (570mm), needs a clean and has a slight clamping mark on the right hand side. £16
2. Unknown titanium bar with shim, uncut (550mm) with a very tiny clamp mark on the right hand side. £30 Or £40 with the newton stem.
clearout by Cezar B, on Flickrclearout by Cezar B, on Flickrclearout by Cezar B, on Flickr1. Biopace 28t £6
2. Biopace 38t £6
3. Biopace 48t £6 (or £15 as a set of 3 above, posted)
4. 7075 alloy CNC 34t £6
5. Biopace HP 46t £6
clearout by Cezar B, on Flickr1. SG C-48t £6
2. SG-X F-46t £6
3. Biopace 28t £6
4. SG C-24t £6
5. SG F-26t £6
clearout by Cezar B, on FlickrAztec nos pads, £6
clearout by Cezar B, on FlickrJagwire new pads, £6
clearout by Cezar B, on Flickr
