Size isn’t everything! When writing about the Exposure Flare rear light size isn’t something that can be overlooked. My first ever impression of the Exposure Flare rear light was one of amazement, I often look at other cyclists on the way to work or when I am on the bus in the dark comparing how good or bad some of the front and rear lights are. It still amazes me some people will go out in the pitch black wearing black and have the smallest dimmest light barley flashing away at the back. The chances of being seen by a vehicle are slim in the best of the darkest conditions add a bit of rain, mist or a slightly iced up window during the winter commute and your not going to be seen by the motorist rushing to get to work or home after a busy day.
Exposure Flare showing size by Jamie Belcher, on Flickr
Recently while on the way to work I was overtaken by another cyclist who’s rear light immediately caught my attention. This light was so so bright I wanted to know more and tried in vain to keep up with the rider hoping to ask what make the light was at the next junction or set of traffic lights. My peddling skills were insufficient to catch this guy so I set about surfing the net to try and identify the light. I soon found the Exposure Flare and recognized this as being the light I had seen. Unfortunately the price put me off buying the light. At £36 its not cheap and I already have what I believed to be a good rear light.
I then came into a bit of money and decided it was time to purchase the light. Really £36 is note that much when your talking about the difference this light can make between being seen and not being seen. As I was off work I gave my girlfriend some money and asked her to pop to the bike shop in Canary Wharf to pick me one up. When she got home and gave me the light I couldn’t believe how small it was. I thought it would take a single AA battery or a AAA. The light unit actually uses a single CR123A disposable cell or a RCR123A rechargeable cell. The version of the light that I purchased contained a disposable cell.
I wasn't a 100% confident with the single fixing method as this consists of a silicon band that fits seat posts sizes 25.0 to 34.9 and is the only mounting to your bike.. The problem I see with this fixing is if the silicon breaks the light will fall off and your are very unlikely to know about this until you get to work or home. I therefore got an old lanyard, attached this to the light which I also fix to the seat post. I now have the main original fixing point which is great and a back up just in case the original should fail. I used a cut down section of an old inner tube to attache the lanyard to the light.
Picture showing fitting of lanyard to Exposure Flare by Jamie Belcher, on Flickr
Exposure Flare with lanyard fitted by Jamie Belcher, on Flickr
Exposure Flare mounted on bike by Jamie Belcher, on Flickr
The light has two modes, flash or constant. To change between the two rotate the head on off on within 3 seconds, simple and keeps the design nice and small. When the light is on for longer than 3 seconds and turned off it will always turn back on with the last mode selected so you dont have to keep going through the settings.
Exposure Flare by Jamie Belcher, on Flickr
This light is seriously bright and really boosts my confidence of being seen by other road users. I use this light in conjunction with my cateye light as additional rear lighting but would be more than happy to run just the Exposure Flare on its own.
Exposure Flare by Jamie Belcher, on Flickr
If you have been considering one of these light I highly recommend it. If you have any questions regarding this light please let me know.
Jamie
Exposure Flare showing size by Jamie Belcher, on Flickr
Recently while on the way to work I was overtaken by another cyclist who’s rear light immediately caught my attention. This light was so so bright I wanted to know more and tried in vain to keep up with the rider hoping to ask what make the light was at the next junction or set of traffic lights. My peddling skills were insufficient to catch this guy so I set about surfing the net to try and identify the light. I soon found the Exposure Flare and recognized this as being the light I had seen. Unfortunately the price put me off buying the light. At £36 its not cheap and I already have what I believed to be a good rear light.
I then came into a bit of money and decided it was time to purchase the light. Really £36 is note that much when your talking about the difference this light can make between being seen and not being seen. As I was off work I gave my girlfriend some money and asked her to pop to the bike shop in Canary Wharf to pick me one up. When she got home and gave me the light I couldn’t believe how small it was. I thought it would take a single AA battery or a AAA. The light unit actually uses a single CR123A disposable cell or a RCR123A rechargeable cell. The version of the light that I purchased contained a disposable cell.
I wasn't a 100% confident with the single fixing method as this consists of a silicon band that fits seat posts sizes 25.0 to 34.9 and is the only mounting to your bike.. The problem I see with this fixing is if the silicon breaks the light will fall off and your are very unlikely to know about this until you get to work or home. I therefore got an old lanyard, attached this to the light which I also fix to the seat post. I now have the main original fixing point which is great and a back up just in case the original should fail. I used a cut down section of an old inner tube to attache the lanyard to the light.
Picture showing fitting of lanyard to Exposure Flare by Jamie Belcher, on Flickr
Exposure Flare with lanyard fitted by Jamie Belcher, on Flickr
Exposure Flare mounted on bike by Jamie Belcher, on Flickr
The light has two modes, flash or constant. To change between the two rotate the head on off on within 3 seconds, simple and keeps the design nice and small. When the light is on for longer than 3 seconds and turned off it will always turn back on with the last mode selected so you dont have to keep going through the settings.
Exposure Flare by Jamie Belcher, on Flickr
This light is seriously bright and really boosts my confidence of being seen by other road users. I use this light in conjunction with my cateye light as additional rear lighting but would be more than happy to run just the Exposure Flare on its own.
Exposure Flare by Jamie Belcher, on Flickr
If you have been considering one of these light I highly recommend it. If you have any questions regarding this light please let me know.
Jamie