Wanted Dura Ace 7402 Brake Hoods

[Rolling Thunder]

Hi all,

Does anyone have/know of a set of 7402 lever hoods that don't cost an arm, leg, kidney, and limb? If so, please PM me.

Many thanks.

 

[Gtpulse]

Hi all,

Does anyone have/know of a set of 7402 lever hoods that don't cost an arm, leg, kidney, and limb? If so, please PM me.

Many thanks.

I don’t but it’s worth noting they are the same as RSX hoods which is the cheapest way of getting them. There’s a couple of sets on eBay not perfect but cheap! I bought a pair off the chap to put on some 6400 brifters which are also the same cleaned up nicely with a bit of wd40.

 

[Gtpulse]

Just realised you’re after brakes
not brifter hoods please ignore my post sorry!

 

[paul8valve]

I feel your pain; they're impossible to find.
I've bought some readily available BL-1055 aero hoods to use on a couple of sets of 7402s I have.
Not a 100% perfect fit but better than anything else out there.

 

[pigman]

I've bought some readily available BL-1055 aero hoods to use

Where did you find those please?

 

[rikster]

Possibly these from SJS Cycles. I bought a pair before to replace the hoods on a pair of 105SC 1055 brake levers and they are a good fit.

https://www.sjscycles.co.uk/brake-levers/shimano-blr400-bracket-covers-86c-9810/

 

[pigman]

Thanks, I'll give those a go. Ive got R400 levers as well if they dont fit the 105s

 

[paul8valve]

apologies for the late reply; yes that's the ones from sjs, mentioned above

 

[kotm]

Hi there,
I'm releasing a whole line of replacement hoods for discontinued Shimnao models, with 7402 aero being one of them. Its looking like end of June shipment. Feel free to follow me on instagram for updates @kotm.bike or the website www.kotm.bike
Alternatively if you have questions please feel free to contact me directly at parts@kotm.bike.

Thank you

(Yes these aren't 7402s)