Drop Outs - Who makes them and where to buy?

[JoeH]

I'm looking for rear long slot dropouts, e.g. Campagnolo 1010

Who else makes drop outs?

Does anyone have any? or know a good place to buy?

Context is a friend who is a keen hobbyist frame builder, is restoring a frame for me (an old Claud Butler). We wanted to find some modernish dropouts. i.e. have a gear hanger; screws for squaring; thick enough for qr; possibly mud guard eyelets; and to fit a 70/71 degree angle.

 

[The Bat]

Ceeway used to be well-regarded and it seems that they cater for small orders https://www.ceeway.com/NEWPARTSPAGES/Forged Dropouts.htm

 

[bikeworkshop]

I've got a bucket of eyeleted dropouts, but no campag iirc

 

[The Bat]

@bikeworkshop I think he means a similar design to Campagnolo 1010, not neccessarily that brand.

 

[bikeworkshop]

I'll dig out the bucket.
There usedto be loads of half decent bikes with a cracked dropout.
Some frames were prone to it, but a lot of bikes had had a 130 or 135 wheel bolted into a 126 dropout then ridden for years
Unfortunately it's quite a bit of time to replace both Dropouts, even with a frame jig, and those old stays got a bit grainy if you poured in too much heat