The saga continues I managed to get an off-cut of vinyl to try on my next saddle which had sections of the base foam missing so I had to add foam to these areas .
I then covered with material to even out and gaps in the foam and proceeded to cover with vinyl .
The vinyl I got was thicker than the stuff that is normally used on bike saddles so it was not as easy to get puckers out as you will see in the pictures .It was not the result I would have liked but I will find some thinner vinyl and have another go in my journey to perfection .
I then covered with material to even out and gaps in the foam and proceeded to cover with vinyl .
The vinyl I got was thicker than the stuff that is normally used on bike saddles so it was not as easy to get puckers out as you will see in the pictures .It was not the result I would have liked but I will find some thinner vinyl and have another go in my journey to perfection .
