sparkybhp
Senior Retro Guru
Hi all, due to change of plans I have a complete DX group for sale. First off, let me say that it’s all there and in fair nick *but - further cleaning/fettling will be needed.
Comprises:
F+R mechs, Front is 28.6 bottom pull.
MT62 canti’s
M650 cranks 170mm, small ring good, middle ring worn, outer ring ok. No crank caps.
M650 hubs, (130/100mm), spin really smoothly + freehub crisp, I’ve trued them to within 1mm or so, the rear still has a small ‘hop’ in it, front is very good. Both on Araya rm17 rims which have breaking surface wear as shown. Correct skewers inc.
ST-M071 brifters, click through all the gears now I’ve wd40’d them and present well other than worn black paint on levers. Rubber boots are a little worn round the edges but not rock hard and split to pieces.
Is £100 fair for the lot? Let me know if I’m miles off..
Thanks.
Comprises:
F+R mechs, Front is 28.6 bottom pull.
MT62 canti’s
M650 cranks 170mm, small ring good, middle ring worn, outer ring ok. No crank caps.
M650 hubs, (130/100mm), spin really smoothly + freehub crisp, I’ve trued them to within 1mm or so, the rear still has a small ‘hop’ in it, front is very good. Both on Araya rm17 rims which have breaking surface wear as shown. Correct skewers inc.
ST-M071 brifters, click through all the gears now I’ve wd40’d them and present well other than worn black paint on levers. Rubber boots are a little worn round the edges but not rock hard and split to pieces.
Is £100 fair for the lot? Let me know if I’m miles off..
Thanks.
