AndrewdeKerf
Retrobike Rider
Hi all.
For sale is my De Kerf Generation.
I bought the frame new from Recycle in 1998, but it could well be a 1997 frame. It is one of the Tange Prestige frames with Ritchey dropouts.
Pictures at the link below.. If anyone is interested I will put up some more detailed photos.
https://goo.gl/photos/wAGKiXcvtaYWauvh7
Spec as follows:
Dekerf Generation frame 1997/8 - 17.5"
Fox F90 forks (travel can be adjusted)
XTR M952 V-brake on rear
Hope Mini disc brake on front
XT rear mech
XT front mech
XT Hollowtech II chainset
XT shifters - 9 speed
Avid V-brake lever (rear)
Ibis titanium handlebar
Ringle stem 130mm
Chris King No Threadset
Race Face XY seatpost
WTB SST saddle (the original one, now rare - well worn but very comfy!)
Hope Pro 2 disc hubs on Mavic 517 back , 717 front (Harry Rowland built with v. low mileage)
Conti X King / Maxxis Crossmark tyres
No pedals but will throw in a pump for the forks
Condition is above average for the age. The paint on the frame is worn in places and the decals have been worn away in a couple of places. No rust, no dents.
Note: I can't vouch for the rebound control on the forks as it has never seemed to do much since I have owned the forks. However otherwise the fork works well.
Looking for £800 ono plus postage.
I will consider splitting if no interest.
For sale is my De Kerf Generation.
I bought the frame new from Recycle in 1998, but it could well be a 1997 frame. It is one of the Tange Prestige frames with Ritchey dropouts.
Pictures at the link below.. If anyone is interested I will put up some more detailed photos.
https://goo.gl/photos/wAGKiXcvtaYWauvh7
Spec as follows:
Dekerf Generation frame 1997/8 - 17.5"
Fox F90 forks (travel can be adjusted)
XTR M952 V-brake on rear
Hope Mini disc brake on front
XT rear mech
XT front mech
XT Hollowtech II chainset
XT shifters - 9 speed
Avid V-brake lever (rear)
Ibis titanium handlebar
Ringle stem 130mm
Chris King No Threadset
Race Face XY seatpost
WTB SST saddle (the original one, now rare - well worn but very comfy!)
Hope Pro 2 disc hubs on Mavic 517 back , 717 front (Harry Rowland built with v. low mileage)
Conti X King / Maxxis Crossmark tyres
No pedals but will throw in a pump for the forks
Condition is above average for the age. The paint on the frame is worn in places and the decals have been worn away in a couple of places. No rust, no dents.
Note: I can't vouch for the rebound control on the forks as it has never seemed to do much since I have owned the forks. However otherwise the fork works well.
Looking for £800 ono plus postage.
I will consider splitting if no interest.
