Dawes, Gazelle, puch and cheap parts.

[madring]

DAWES BIKE (project):

Dawes frame & forks made of reynolds 500 (Cr-mo) feels nice and light as 531 to me. The bike is as pictured, the rear wheel needs to be replaced as the the rim is BROKEN, the rest is in working condition.

Seat tube 58cm
top tube 57cm

http://www.flickr.com/photos/goodtimes2 ... otostream/

All seen in picture 120£

GAZELLE FORMULA FRAME (routed cables, tidy)

Reynolds 525 (very similar to the famous 531, I cannot tell the difference).
Seat tube (c-t): 59,5cm
Top tube ( c-c): 56,5cm
Spacing: 100/130mm

http://www.flickr.com/photos/goodtimes2 ... 820318905/

Only frame and forks --> 90£

PUCH FRAME:

Seat tube (c-t): 53cm
Spacing: 100/126mm
Nice red candy colour with some chips, I would not paint it.

http://www.flickr.com/photos/goodtimes2 ... 820318905/

Only Frame& forks 40£

SEATPOST(27.2) & SADDLE both nice and light - 30£

http://www.flickr.com/photos/goodtimes2 ... 820318905/

CHEAP PARTS:

1.stem and bulhorns with brown brooks tape-> 30£ posted.
2.Stem and bulhorns-10£ each or 18£ togheter.
3.Handlebars (the ones on their own)- 10£
3.Shimano arabesque crankset, left arm has a small crack that's why adding a compatible left one- 25£ (all)
3.Black risers 10£
4.SR fluted seatpost 27.0mm - 10£
5. Track cog (16T) new, never used. 5£
6. 2 TTT stems - 10£ each.
7. Clipless pedals - 10£
8. Weimann levers and calipers (cabled & housing)- 15£ (for all)
9. Black, very light and nice,nearly new - 20£
10. The black seatpost,lever and front mech are FREE

http://www.flickr.com/photos/goodtimes2 ... 820318905/



PS; The pictures are quite detailed if you zoom you use original resolution at flickr.

Regards

 

[mnfl]

pm bullhorns

 

[ronniebrain]

You say a crack on the left hand Arabesque arm....whereabouts is it etc and realistically how bad and what is the other crank you are including?

 

[madring]

crack

Attached you can judge the crack it does not seem very deep but....

The other arm is an inter city one and is in good nick, is next to the arabesque on the picture.

 

[ronniebrain]

Thanks for the piccy.....will try and find out if I can get that welded back up and Then I can remachine it...will get back to you in a day or so, what would be ya price with out the inner city arm as I wont need it?.

 

[madring]

Same price as is its only purpose, I do not have the spider for it.

I am pricing a cracked arabesque at 25£ basically.

 

[ronniebrain]

Ok...ive no use for it either so for that reason im out :?