daveaasmith
Senior Retro Guru
- Feedback
- View
The following stuff has been stored for a year in a damp storage cellar, which has taken its toll, some more than others.
Prices (hopefully) reflect this.
If any more photos are required, let me know......
Rocky Mountain ETSX Team Issue front triangle - 21.5"
Paint flaking off in many places and very 'bubbled'.
Needs a complete strip and repaint.
£10 + postage
Rocky Mountain ETSX carbon rear triangle and linkages - for a 21.5" frame.
May be interchangeable with other sizes - please research carefully.
Looks sound, just some lacquer pealing off.
All bearings recently changed, and seem sound.
£20 + postage
Fox RP23 rear shock 7.5" x 2.0" (from above frame).
Could probably do with a service, but moves fine (I've let the air out to check).
No visible marks to the stanchion.
Main body in good condition
Pivot hardware needs replacing.
£50 + postage
Pace RC40 forks
Adjustable 100-130mm
Steerer 204mm.
Carbon legs in good condition.
Stanchion wear visibile in photos, looks worse than it feels, no oil leak noticed.
Small amount of corrosion to the magnesium dropouts (from damp cellar storage).
Move nicely, have adjuster and launch control dials.
£60 + postage
Hope Mono M4 brakeset.
Shows corrosion to the caliper body (white in pictures).
Were service in April 2013 at Hope, and not used since.
Goodridge braided hoses
Rotors 180/160.
Hoses 78mm, 140mm.
Brand new pads.
£50 + postage
Hope XC hub front wheel with Mavic E321 rim.
Bearings spin but aren't smooth.
Complete with QR skewer.
£20 + postage
Thomson layback seatpost.
27.2mm and 410mm length.
Good condition, just hardware rusty.
£25 + postage
Hope BB and headset - stainless in black.
Bearings seem ok.
Headset (not pictured) is tatty and needs new bearings and is included free with the BB.
£10 + postage
If I'm out on prices, shout up - always a deal to be done.
Photos here..........
http://s206.photobucket.com/user/daveaa ... brary/daas
Prices (hopefully) reflect this.
If any more photos are required, let me know......
Rocky Mountain ETSX Team Issue front triangle - 21.5"
Paint flaking off in many places and very 'bubbled'.
Needs a complete strip and repaint.
£10 + postage
Rocky Mountain ETSX carbon rear triangle and linkages - for a 21.5" frame.
May be interchangeable with other sizes - please research carefully.
Looks sound, just some lacquer pealing off.
All bearings recently changed, and seem sound.
£20 + postage
Fox RP23 rear shock 7.5" x 2.0" (from above frame).
Could probably do with a service, but moves fine (I've let the air out to check).
No visible marks to the stanchion.
Main body in good condition
Pivot hardware needs replacing.
£50 + postage
Pace RC40 forks
Adjustable 100-130mm
Steerer 204mm.
Carbon legs in good condition.
Stanchion wear visibile in photos, looks worse than it feels, no oil leak noticed.
Small amount of corrosion to the magnesium dropouts (from damp cellar storage).
Move nicely, have adjuster and launch control dials.
£60 + postage
Hope Mono M4 brakeset.
Shows corrosion to the caliper body (white in pictures).
Were service in April 2013 at Hope, and not used since.
Goodridge braided hoses
Rotors 180/160.
Hoses 78mm, 140mm.
Brand new pads.
£50 + postage
Hope XC hub front wheel with Mavic E321 rim.
Bearings spin but aren't smooth.
Complete with QR skewer.
£20 + postage
Thomson layback seatpost.
27.2mm and 410mm length.
Good condition, just hardware rusty.
£25 + postage
Hope BB and headset - stainless in black.
Bearings seem ok.
Headset (not pictured) is tatty and needs new bearings and is included free with the BB.
£10 + postage
If I'm out on prices, shout up - always a deal to be done.
Photos here..........
http://s206.photobucket.com/user/daveaa ... brary/daas
