coreygun
Senior Retro Guru
Curtis SuperX - Iconic frame hand brazed by the legendary Brian Curtis himself using T45 steel. This frame is from the early 2000s, and has been barely used. The paint really is as good as it looks in the photos. Other than a few very light marks from mild use, there is a small paint chip under the Evoc sticker on the right seat stay by the seat tube, and there is also a paint chip on the left seat stay, both shown in the photos. There are a few marks under the BB too.
21.25" top tube length
14" seat tube length
For 26" wheels
Standard 1 1/8th steerer tube
BMX bottom bracket with DMR Wondercups converter to standard 73mm
Horizontal dropouts
Disc & v-brake mounts
31.8mm seat clamp
*** BB converter and seat clamp are included - Headset is NOT included
£340
-----
24 Bicycles Le Toy III (SOLD) - Legendary DH hardtail / dirt jump frame. Recent powder coat, almost perfect, but obviously there are a few marks from parts being mounted on it. The only other thing of note is the snapped bolt in one of the V-brake boss holes, so probably not relevant if you're going to run disc brakes.
Comes with the FSA Pig headset, Da Bomb chain tensioners, Truvativ seat post (full length), seat clamp, BMX BB cups and bearings. The bearings are rough now, but the cups can still be kept in for new sealed bearings. I don't have the V-brake bosses though, but obviously it can be run with disc brakes. Designed to be used with 24 or 26" wheels, and strong enough for triple clamps too.
Size - Not much reference material anywhere, so I've measured the seat tube which is 340mm and the top tube is 570mm. Chainstay is adjustable from 400-440mm.
£330 - SOLD
-----
These are also both on Ebay for a bit more. You're welcome to collect them yourself in Surrey, or i'll post it fully them fully insured and protected extremely well for £20 each.
21.25" top tube length
14" seat tube length
For 26" wheels
Standard 1 1/8th steerer tube
BMX bottom bracket with DMR Wondercups converter to standard 73mm
Horizontal dropouts
Disc & v-brake mounts
31.8mm seat clamp
*** BB converter and seat clamp are included - Headset is NOT included
£340
-----
24 Bicycles Le Toy III (SOLD) - Legendary DH hardtail / dirt jump frame. Recent powder coat, almost perfect, but obviously there are a few marks from parts being mounted on it. The only other thing of note is the snapped bolt in one of the V-brake boss holes, so probably not relevant if you're going to run disc brakes.
Comes with the FSA Pig headset, Da Bomb chain tensioners, Truvativ seat post (full length), seat clamp, BMX BB cups and bearings. The bearings are rough now, but the cups can still be kept in for new sealed bearings. I don't have the V-brake bosses though, but obviously it can be run with disc brakes. Designed to be used with 24 or 26" wheels, and strong enough for triple clamps too.
Size - Not much reference material anywhere, so I've measured the seat tube which is 340mm and the top tube is 570mm. Chainstay is adjustable from 400-440mm.
£330 - SOLD
-----
These are also both on Ebay for a bit more. You're welcome to collect them yourself in Surrey, or i'll post it fully them fully insured and protected extremely well for £20 each.
Attachments
Last edited:
