Clear out....

[the one and only]

Just a small clear out.

Stuff needs to go so make me a offer

Kona limited edition Colin Mcrae ford rally 20in frame in chrome
and is v-brake in mint condition £55 posted

Kona Scab jump or trail frame with BB and shimano chain set
needs a bit of TLC £30 posted

2009 Revolution Triad 3. 18in frame. This same frame was used on all
three models of bike and is made for Edinburgh Cycles by Merida,
one of the world’s largest bike builders and a leading hydro formed
tubing expert. good condition £60 posted

Marzocchi Bombers Z.5 oil bath and ssv damping disc and
v-brake in good condition £42.50 posted

Kona thumbs up seat post in 27.0mm good condition £11 posted

Chrome Tranz-x bars uncut with a slight rise 580mm on bar
but 565mm when measured with a tape £11 posted

Hayes nine front disc brake needs a bleed but with new pads £16.50 posted

Shimano deore XT front mech FD-M760 mega 9 in good
condition £16 posted

Shimano deore XT sis8 rear mech RD-M739 in good
condition £21 posted

Shimano deore XT rear mech in full silver mega 9
RD-M760 £21 posted

Kona box stem 75 reach and a 25 rise £11 posted

Shimano SPD pedals PD-M520 £15 posted

Sunrims DS2-XC on a Shimano LX silver hub with center
lock disc. Runs true £31 posted

Hope 30.mm seat clamp in blue brand new but no box £11 posted

K-nine bash ring £8 posted

Shimano deore mega 9 front and rear shifters. Rear needs
a look at as not shifting properly £12.50 posted

Bontrager front and rear skewers with the common scrapes £10 posted

Shimano Acera rear mech with big jockey wheels RD-M340
8 speed £6.50 posted

Shimano v-brake and shifter combo front and rear (Ci-deck plus)
ST-EF29-8 and a ST-EF29-L in a good condition £16.50 posted

Paypal gift please.

I will do a discount on 2 or more things and open to offers
but not too much.

I'm after some Easton EA50 bars uncut and a EA50 stem
Hope front and rear skewers in black. So i will do a deal
on some of my stuff.

I can send photos to a email address only.

Thanks.

 

[xizang]

Size and pics of the Scab please.

 

[Khane]

not much help with your sale but CRC are doing EA50/70 stems for cheap at the min.

EA50 http://www.chainreactioncycles.com/Mode ... elID=11614
EA70 http://www.chainreactioncycles.com/Mode ... elID=18135

 

[Sidewinder]

what size is the xt front mech and is it top or bottom pull?

 

[the one and only]

what size is the xt front mech and is it top or bottom pull?

its a full size clamp on the mech 34mm i think and i might have the
shims for it somewhere but don't count ya chickens.
Its a top swing at the moment but can do bottom also.

 

[Rumble]

Also interested in pics of the Kona frame

 

[the one and only]

Also interested in pics of the Kona frame

I have 2 kona's and need a email address please.

 

[Rumble]

Also interested in pics of the Kona frame

I have 2 kona's and need a email address please.

Oops, it's the scab i'm interested in, pm'd you my email.

 

[the one and only]

Revolution Triad 3. 18in frame sold

 

[the one and only]

Stuff needs to go so make me a offer

You never na ya luck